FRESH WATER PROCESSOR OIL COOLER heat exchanger H17 EPDM NBR VITON

LT FRESH WATER COOLER Heat exchanger, common used in oil industry, SS316 0.5mm NBR Plate heat exchanger H17

H17 Operating Principle

The plate heat exchanger consists of a number of thin corrugated metal plates. The plate corrugations form flow channels for the heat exchanging fluids and provide strength to the compressed plate pack. The plates contain ports for fluid inlets, outlets and interconnect passages as required. Gaskets are attached to the plates, forming a seal between the heat exchanging fluids and the surroundings. In the example shown here, the cold fluid enters at the bottom and the hot fluid at the top.

Frame

The plates are clamped together to a predetermined dimension by the tie bars between two thick metal slabs: a stationary slab (head) and a moveable slab (follower). Connections for the fluid inlets and outlets can be made on either slab. The plates are hung on the top bar and guided by the bottom bar. An end column supports the top and bottom bar ends.

Sanitary plate heat exchangers

Frames used for sanitary or hygienic duties are fabricated in solid stainless steel or carbon steel with stainless steel covering. Standard connections are usually sanitary tube fittings. Industrial fittings may be supplied when required. Plates may be either parallel flow or diagonal flow.

H17 Gasket Parameter

MC Plate Heat Exchanger Main Components

1. Head for connections and clamping the plate pack

2. Follower for clamping the plate pack

3. End support for supporting the top and bottom bars

4. Top bar for carrying and guiding the follower and plate pack

5. Bottom bar for guiding the follower and plate pack

6. Tie bars for clamping the plate pack between head and follower

7. Flow plate (Figure 1)

8. Flow gasket (Figure 1)

9. Nut for tie bar

10. Adjustable or fixed legs

11. Connector grid for additional fluid connector bosses

12. Connector bosses

H17 Plate Heat Exchanger Advantages

Goods Pictures

Jiangyin M&C Heat Parts Co.,Ltd is a China heat exchanger manufacturer located in Wuxi, Jiangsu. M&C performing service and maintenance on heat exchanger gaskets and plates for other models.

M&C operates at the forefront of thermal technology,offering innovative and effective heat transfer products worldwide with a strong focus on managing energy efficiently

M&C specialise in the design and manufacturer of a wide range of heat exchangers for industrial, food,dairy,agricultural,hygienic,refrigeration,HVAC and marine applications.

Over these years, M&C has been developing new types of heat exchangers and committed to working closely with our customers to delivery step by step improvement. We’re proud to operate in a setor where innovation can save energy,reduce waste and improve final product quality without harming the enviroment.

We have professional technical teams to support our products innovation and quality control.

Welcome to visit our plants, and have win-win cooperation together!

Human-oriented, Integrity deelopment, Qulity first, Service sincerely.