Add to Cart
High Precision Pleated Filter Element , Sintered Stainless Steel
Filter Element
Stainless steel pleated filter elements/cartridges overcome the
temperature and compatibility limitations of fabric or synthetic
fiber cartridges by replacing them with these stainless steel wire
cloth elements. They’re good up to 500ºF instead of the usual
250ºF, and they are unaffected by most caustic fluids.
Stainless steel pleated filter elements/cartridges are made
entirely of 304 or 316 stainless steel, they are cleanable and
reusable, and can withstand differential pressures up to 60 psi.
(500 psid units are also available.) You can choose particle
retention ratings as fine as 5 microns.
Advantages of stainless steel pleated filter elements:
High dirt holding capacity;
High reliable standard specifications;
Low pressure drop due to high porosity;
Accurate filtration rating.
Filtration rating available (micron) : 3,5,7,10,15,20,25,30,40,60.
Any outline size available according to customer's requirement.
Major data of Stainless steel pleated filter elements/cartridges: In filtration of polyester and chemical fiber spinning production.
CODE | D (mm) | L (mm) | (m1) | (m2) | AREA (m2) |
CF-35A | 35 | 207 | 3/4"-16UNF OR 20×1.5 | 0.07 | |
CF-35B | 35 | 425 | 3/4"-16UNF OR M20×1.5 | 3/16"-24UNC OR M6 | 0.15 |
CF-35C | 35 | 485 | 3/4"-16UNF OR M20×1.5 | 3/16"-24UNC OR M6 | 0.17 |
CODE | D (mm) | L (mm) | (m) | AREA (m2 ) |
CF-60A | 60 | 500 | M33×1.5 | 0.5 |
CF-60B | 60 | 400 | M33×1.5 | 0.4 |
Product Name | Stainless steel pleated filter elements/cartridges |
Material | stainless steel 304 or 316L |
Cleanable | Backwash and clean easily,can be reused with longer service span. |
Standard | DIN GB ISO JIS BA ANSI |
High strength | Extreme mechanical strength and pressure tolerance, can be machined, welded and assembled. |
Filter rating | 1-300um |
Air Permeability | Good |
Used | Chemical, metallurgy,machining,pharmaceutical, food, water treatment and so on |