Medical Face Mask Differential Pressure Tester

Medical Mask Differential Pressure Tester

Applications

Medical Mask Differential Pressure Tester or medical face mask breathability tester, is a lab testing instrument for determination breathability of medica face masks, the test principle is, through measuring the differential pressure required to draw air through a measured surface area at a constant air flow rate, to test the air exchange pressure of the medical face mask material, which indicates the breathability of medical face masks.

Built-in water-filled differential manometer is used to measure the differential pressure, a mass flow meter is used for measurement of the airflow. An electric vacuum pump draws air through the medical mask breathability tester and a needle valve is used to adjust the airflow rate.

Medical face masks differential tester complies with standards like EN 149, EN 14683, ASTM F2100, MIL-M-36954C, GB 19083, GB 2626, YY/T 0969-2013.

Specifications

• Test time: Adjustable

• Air source: Air compressor

• Test airflow: (8 ± 0.2) L / min

• Power: AC 220 V 50 Hz 1 Kw

• Manometer range: 0 ～ 500 Pa

• Sealing type: O-shaped ring seal

• The internal diameter of the top holder and the bottom holder in the contact area with specimen: Φ25 mm
  
  

Standards

EN 149, EN 14683, ASTM F2100, MIL-M-36954C,GB 19083, GB 2626, YY/T 0969-2013

How’s Your Future Partner？

Everybody wears clothes, but only TESTEX who is proficient in the manufacturing, testing and research industry that really understands the full story of clothing. From fiber to fabric and then to garments, every stage of the journey needs to be tested to ensure the right standards for high-class textiles are met. TESTEX is dedicated to offering a wide range of testing equipment as follow to bring you high-quality and safe textiles:

TESTEX has concentrated on technical innovations and quality controls for textile testing equipment over 10 years. With great efforts of self improvement and cooperative learning, TESTEX is known worldwide for its high-quality products, prompt after-sales service and professional consultation.

TESTEX has been assessed and certificated by SGS as meeting the requirements of ISO 9001:2015. Additionally, TESTEX has become a member of ASTM and AATCC, and worked directly with many international laboratories, famous retailers, even government organizations and colleges. All of them as follow has established a strong relationship with TESTEX: