Type 3 Transient Surge Suppressor 24v / 48v / 60v / 120v / 220v / 230v
Brand Name:TSTLP
Certification:CE Compliance
Model Number:TS-230M5RM
Minimum Order Quantity:Negotiable
Delivery Time:Around 7 working days upon receipt of payment
Payment Terms:100% TT / LC / Western Union / MoneyGram / WeChat Transfer / Alipay / Wanda Money Transfer / Cash ahead
Contact Now
Add to Cart
Active Member
Location:
Heyuan Guangdong China
Address:
Hongdiyuan Industrial Park, Wufeng Avenue, Linjiang Town, Jiangdong New District, Heyuan, Guangdong, P.R.C.
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
24v / 48v / 60v / 120v / 220v / 230v Type 3 Transient Surge Suppressor
TS-230M5RM Class III transient surge suppressor is designed as per IEC 61643-11 to install at LPZ 1-2 or higher as fine protection for electronic devices. e.g. icebox, air conditioner, photocopy, communication equipment, network equipment... various power supply system
Relative 150Vdc / 600Vdc / 750Vdc / 1000V DC Surge Protection Device for photovolatic protection.
- Type 3 Surge Protector Technical Data
| Model No. | TS-230M5RM | TS-120M5RM | TS-60M5RM | TS-48M2RM | TS-24M2RM |
| Normal a.c. Voltage Un | 230V | 120V | 60V | 48V | 24V |
| Rated voltage (max.a.c. continuous voltage) Uc | 320V | 150V | 75V | 60V | 30V |
| Rated voltage (max.d.c. continuous voltage) Uc | 320V | 150V | 75V | 60V | 30V |
| Normal Current IL | 16A | 16A | 16A | 16A | 16A |
| Nominal discharge current (8/20, L-N) In | 3 kA | 2.5 kA | 2.5 kA | 1 kA | 1 kA |
| Nominal discharge current (8/20, L+N-PE) In | 5 kA | 5 kA | 5 kA | 2 kA | 2 kA |
| Combination wave (L-N) Uoc | 6 kV | 6 kV | 6 kV | 2 kV | 2 kV |
| Combination wave (L+N-PE) Uoc | 10 kV | 10 kV | 10 kV | 4 kV | 4 kV |
| Voltage protection level(L-N) Up | ≤1.15 kV | ≤0.7 kV | ≤0.5 kV | ≤0.35 kV | ≤0.2 kV |
| Voltage protection level(L+N-PE) Up | ≤1.5 kV | ≤1.1 kV | ≤0.85 kV | ≤0.85 kV | ≤0.85 kV |
| Response time tA | ≤25ns (L-N); ≤100ns(L+N-PE) | ||||
| Max. back up fuse | 16A gL/gG | ||||
| Operating temperature range Tu | -40°C...+80°C | ||||
| Short-circuit withstand capability at max.backup fuse | 6kArms | ||||
| Relative humidity: | ≤95% (25°C) | ||||
| Cross-sectional area | 0.5mm2 ~ 6mm2 solid / 4mm2 flexible | ||||
| Mounting on | 35mm2 DIN rail | ||||
| Enclosure material | Red thermoplastic, UL94-V0 | ||||
| Standards | IEC 61643-11; GB 18802.1; YD/T 1235.1 | ||||
| Type of remote signalling contact | Break contact | ||||
| Switching capacity UN/IN | AC:250V/0.5A DC:250V/0.1A,125V/0.2A,75V/0.5A | ||||
| Cross-sectional area for remote signalling contact | Max. 1.5mm2 solid / flexible | ||||
| Compliance | CE (LVD, EMC) | ||||
- Main Character
- Class 3 transient surge suppressor with LIGHT indications: Green - OK, red - Fault
- Single-phase surge protection and with disconnector
- Remote signalling connector for fault indication
- INSTALLATION STEPS
- Mount the transient surge suppressor on 35 mm DIN rail.
- Connect conductors, the cross-sectional area of cable must be larger than 4mm2 . The withstand voltage value of cable is not smaller than AC500V; ensure wiring reliable.
- If Remote Alarm needed, it s/b connected signal lines to remote signal terminal 1 and 2 connected.
- After above, switch on the power supply and turn on the circuit breaker, if the transient surge suppressor’s indicator light displays green,this indicates the unit is operating normally.
Regularly inspect the operating status, especially after lightning. Once the fuse upstream breaks, or the transient surge suppressor's indicator light displays red, electrician should check/replace the transient surge suppressor.
- Installation Diagram
- Real Type 3 Surge Protection Device Installation
PDF Catalog Download - TSTLP 24~230V Type 3 SPD.pd...
Tag: transient surge suppressor
Type 3 Transient Surge Suppressor 24v / 48v / 60v / 120v / 220v / 230v
Inquiry Cart
0