SGS 16 Ton Cable Drum Motorised Rail Trolley For Steel Plant

16 Ton Cable Drum Powered Transfer Trolley On Rails For Steel Plant

1. About BEFANBY Product

I. Working principle:The cable drum powered transfer trolley are powered by spring cable drums which installed at the bottom of the trolleys or one side of the trolley. The one side of AC 380V cable is connected with the power source and the other side is linked to the motor. The cable is wound around cable drum.

II. Main parts: Trolley frame, Trolley wheels, AC motor, Gear Reducer, Cable drum, Cable arranger, Electrical control box,Hand-held pendant, Remote Control, Alarm Light

III. Product Manufacturing Processing

BEFANBY promise that quality is always the first concern, and BEFANBY specially set up a quality inspection department. Every time we complete a transfer trolley, we must carry out strict quality control, including the appearance of electric transfer trolley, the operation of electric transfer trolley, etc.

IV. Operation Instructions:

1. Before using for the first time, check whether all electrical connecting screws are loose. if they are loose, please press them tightly.

2. close the main circuit breaker q0, then close the circuit breakers f301 and f303.

3. operation of flashlight: place the selection switch s40 at the position of flashlight. press the s11 start button, at this time, the main contactor k0 is closed and connected, but the remote control and ground operation are invalid. if it is necessary to stop the machine, press s21. at this time, press the forward and backward buttons of the flashlight door, and the flat car can move forward and backward.

4. ground operation: place the selection switch s40 in the ground operation position. press s12 start button, at this time, the main contactor k0 is closed and connected, but the remote control and hand switch operation are invalid. if it is necessary to stop the machine, press s22. at this time, press the forward and backward buttons of the ground operation panel to move forward and backward.

5. remote control operation: put the first selection switch s40 in the remote control operation position. press s13 start button, at this time, the main contactor k0 is closed and connected, but at this time, the ground operation and hand switch operation are invalid. if it is necessary to stop the machine, press s23. at this time, press the forward and backward buttons of the remote control panel to move forward and backward.

6. adjustment of starting torque, adjusting the time of time relay k401, k402 and k403, lengthening the time of relay can slow down the starting torque. reducing the time of the relay can increase the starting torque, but at this time the impact of the flat car is relatively large.

7. emergency stop: in any mode of operation, if it cannot be stopped in operation, the stop key must be pressed immediately.

V. Technical parameter

If you are interrested in our product, pls contact us.

Thank you very much, and have a good time!

2. BEFANBY Company

Xinxiang Hundred Percent Electrical And Mechanical Co., Ltd.(BEFANBY) is a professional international material handling equipment company integrating R&D, design, production and sales. It has a modern management team, technical team and production technician team.The company was established in September 2003 and is located in Xinxiang, Henan. BEFANBY can not only provide transfer cart quotations, but also provide you with satisfactory handling solutions.

BEFANBY has an annual production capacity of more than 1,500 sets material handling equipment, which can carry 1-1,500 tons of workpieces. With more than 20 years of experience in the design of electric transfer carts, it already has the unique advantages and mature technology of designing and producing heavy-duty AGV and RGV. The main products include AGV (heavy duty), RGV, KPD low-voltage rail type, KPX battery type, KPT towing cable type, KPJ cable reel type, KPC sliding contact line type, BWP trackless type, KP unpowered type, BZP turntable , BWT flatbed trailer and other eleven series. Including conveying, turning, coil, ladle, painting room, sandblasting room, ferry, hydraulic lifting, traction, explosion-proof and high temperature resistant, monorail, generator power, railway maintenance cart, railway and road tractor, locomotive turntable and other hundreds of handling equipment and a variety of transfer cart accessories. Among them, the explosion-proof battery electric transfer cart has obtained the national explosion-proof product certification, number: CNV21.0215X.

BEFANBY products are sold to all over the world, such as United States, Canada, Mexico, Germany, Chile, Russia, Saudi Arabia, the United Arab Emirates, Thailand, Singapore, Indonesia, Malaysia, Australia, South Korea and other more than 90 countries and regions.

1. Material handing equipment

• AGV Automatic Guided Vehicle; RGV Rail Guided Vehicle
• Rail transfer cart, motorized transfer trolley, coil transfer cart
• Ladle transfer car, turning transfer cart
• Hydraulic lifting transfer cart
• Customized Transfer Cart
• Electric turntable
• Trackless transfer car
• Train tractor
• Flatbed Trailer
• Winch
• Railway wheel
• Steel rails

2. Product line, assembly line and workshop, warehouse handling solution provide

Painting line

Mold handing in workshop

Steel coil, ladle, steel scrap handling on production line

Workshop crossing rail layout handling solution

90 Degree turning rail path handling solution

Arc rail factory handling routie handling

Our Marketing Concept:

Attentively Manufacturng; Keeping on improving and elaborately serving to make our customers satisified.