CuCo1Ni1Be CW103C Cobalt Nickel Beryllium Copper Round Bar High Performance

CuCo1Ni1Be CW103C Cobalt Nickel Copper Beryllium round rod

Product Description
CuCo1NiBe Details:CuCo1Ni1Be CW103C Cobalt Nickel Beryllium Copper CuCo1Ni1Be—CW103C (DIN 2.1285) Cobalt Nickel Beryllium Copper Alloy contains approximately 1% Cobalt, 1% Nickel and 0.5% Beryllium. After hot forging and heat treatment processes this material gains considerably hardness, electrical and thermal conductivity as well. It is possible to have different combinations of electrical conductivity and hardness by changing the heat treatment conditions；CuCo1Ni1Be also Offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively, all of its properties are quite the same as CuCo2Be-C17500 and CuNi2Be-C17510.

Product Feature
Chemical Composition: Be: 0.40-0.70%Co: 0.80-1.30%Ni: 0.80-1.30%Cu: BalanceNote: Copper plus additions equal 99.5% minimum. Typical Physical Properties:Density (g/cm3): 8.83Density before age hardening (g/cm3): 8.75Elastic Modulus (kg/mm2 (103)): 14.10Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6Thermal Conductivity: 209 W/m • oK at 20 CMelting Range (°C): 1000-1070 Note: 1). the units are based upon Metric.2). the typical physical properties apply to age hardened products.

Product Specification/Models
International Specification: Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3Sheets: ASTM B534Wires: ASTM B441Plates: ASTM B534, SAE J461,463; RWMA Class 3 European Standards: CuCo1Ni1Be, DIN 2.1285; CW103C to EN Note: ASTM: American Society for Testing and Materials SAE: Society of Automotive Engineers AMS: Aerospace Materials Specification (Published by SAE) RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to ASTM.

Introduction of Our Company

Shanghai Changyu Copper Co., Ltd.’s main products are copper and copper alloy plates, strips, foils, tubes, bars, types, aluminum-magnesium sheets and strips, more than 170 alloy grades, more than 760 varieties, and tens of thousands of specifications. Products are widely used in aviation, aerospace, shipbuilding, military, metallurgy, electronics, electromechanical, textile, transportation, construction, chemical, light industry, energy and other national economic fields, has outstanding contribution for the country's national economic development, domestic high-tech industries and national defense military. Our products are exported to South Korea, Russia, Canada, Australia, Europe and other countries and regions.

We adhere to the principle of high-end products and build “six first-class”: first-class equipment, first-class management, first-class technology, first-class team, first-class products and first-class market.

The current sailing, tomorrow's soaring, originating from the thick and dignified shoulders. We will give full play to the leading edge of science and technology, and cooperate with customers with high-quality products and perfect service system to provide high-quality and satisfactory products. Condensing the monument of the non-ferrous metal industry and creating a dream of Changyu!