Titanium Clad Copper Round Rod Corrosion Resistance For Electrodeposition Industry

titanium clad Copper Round Rod

The strengths of Titanium clad copper:
Low processing costs
Big area of composite materials available with excellent metallurgical bonding by explosive welding process
Copper Core and Great weldability for connecting, capping and joining
Fantastic corrosion resistance in strongly corrosive solutions due to outside Titanium layer
Excellent conductivity and fully ductile for shaping and forming due to OFHC (Oxygen-Free High Conductivity)

Application:
The rack in the industry of electrodialysis, electrodeposition, electroplating, wet metallurgy, hydrometallurgy, etc.
An excellent conductivity and is fully ductile for shaping and forming, and also with great weldability for connecting, capping & joining, high anti-corrosion for titanium layer, Long time working life.
Package: Plastic bag as inside, wooden case as outside, or according to clients' demands.

1).Standards:GB/T12769 2)Base:Cu(T2,TU2),AL 3)D:(8~60)mm 4)corrosion resistance 5)used by MMO and Platinised anode (ICCP)

We specialize in this field for several years,with the strength of titanium bars.With good quality and pretly competitive price.

With advanced explosion-rolling process, we provide the first rate non-ferrous metal composites, mainly titanium clad copper and also including zirconium clad copper, 316L steel clad copper, titanium clad 316L steel plates, bars, tubes, composite wire, and multilayer clad composites, etc. The clad metal products could be up to four individual layers of metal or alloys. At minimum, there is a core and an outer layer, each layer thickness could be optimized to your needs.
B. Processed products of non-ferrous metal, mainly titanium fasteners, screws, nuts, flanges and bends;
C. Titanium and titanium alloy bars, rods, tubes, pipes, plates, sheets, wires, coils, foils, and sections with high machining precision;
D. Various kinds of equipment made of titanium, such as titanium heat exchanger, titanium tray, and titanium anodes.
Titanium clad copper bars and other non-ferrous metals clad composite materials.
Titanium clad copper bars have been made by that a copper bar is clad in a certain thickness of titanium level, it mainly uses as a conductor under more corrosive work conditions. It is often used as a stand in plating, electrolysis, hydrometallurgy processes, because it has not only the original conductive property of the copper bar, but also protecting the copper bar from corrode by titanium level, and can greatly lower pollution of electrolyte and electroplate.
But, if you request that the material has this function above, then you must be sure that there are much stronger combination strength and much higher pasting rate between the copper bars and the titanium level, this can not be met by traditional mechanical combination methods. So in order to overcome it, our company, with advanced explosion-rolling process, has successfully produced titanium clad copper bars with sheared strength ≥ 130 Mpa, compact rate ≥ 98%, we can also supply the various specification of round, square, flat bars material, the longest length of the bars can reach above 10 meters and we can weld different shape material together in according to the clients request. We could also make nickel clad bars, stainless steel clad copper bars, zirconium clad copper bars series products through the same process technology.
Properties for Titanium Clad Composites
(1) Shear strength: The shear strength is tested and guaranteed in accordance with GB, ASTM, and JIS.
(2) Tensile strength: The tensile strength is guaranteed.
(3) Ductility: Ductility of cladding metal is guaranteed in face bend (=cladding metal in tension), and the ductility of base metal is guaranteed in reverse bend (=cladding metal in compression).
(4) Elongation: The lower limit of the elongation of cladding or base metal is guaranteed.
(5) Hardness: The bonded interface is slightly hardened after explosion bonding.
The interface can be softened by heat treatment to an original level.
There exists no difficulty in bending and drawing works.
(6) Corrosion Resistance: Explosion bonding, a clad processing, guarantees excellent corrosion resistance of clad materials.
(7) High reliability; High conductivity; Biocompatibility; Weld ability; Cost effective.

Introduction of Our Company

Shanghai Changyu Copper Co., Ltd.’s main products are copper and copper alloy plates, strips, foils, tubes, bars, types, aluminum-magnesium sheets and strips, more than 170 alloy grades, more than 760 varieties, and tens of thousands of specifications. Products are widely used in aviation, aerospace, shipbuilding, military, metallurgy, electronics, electromechanical, textile, transportation, construction, chemical, light industry, energy and other national economic fields, has outstanding contribution for the country's national economic development, domestic high-tech industries and national defense military. Our products are exported to South Korea, Russia, Canada, Australia, Europe and other countries and regions.

We adhere to the principle of high-end products and build “six first-class”: first-class equipment, first-class management, first-class technology, first-class team, first-class products and first-class market.

The current sailing, tomorrow's soaring, originating from the thick and dignified shoulders. We will give full play to the leading edge of science and technology, and cooperate with customers with high-quality products and perfect service system to provide high-quality and satisfactory products. Condensing the monument of the non-ferrous metal industry and creating a dream of Changyu!