

Add to Cart
Product application and requirements:
1. Porous media filters are widely used in water treatment
processes and can be used alone, but most are pre-filtered for
advanced water treatment (exchange resin, electrodialysis, reverse
osmosis).
2. The multi-media filter is a commonly used pretreatment device
for deep purification of water quality, and different filter
materials can be added according to the process requirements.
3. The material of the multi-media filter can be made of carbon
steel or stainless steel. The operation modes are fully automatic
and manual.
Multi-Media filters are designed for enhanced water quality
filtration for the removal of organic and inorganic suspended
solids down to 5 microns.
Multi-Media filters may be used as a stand-alone system or in
conjunction with or as a pretreatment for other filtration
technologies.
The Multi-Media Filtration Systems utilize a vertical side shell
depth of 60" with accompanied reverse stacked medias for
progressive filtration through the filtration system.
Industrial media filters utilize our simple backwash system for
ease of
operation and consistent water quality.
Application
Removal of organic and/or inorganic suspended solids down
to 5 microns with enhanced solids capacity vs. single media
sand filtration
■ Storm water runoff, industrial process water, incoming plant
water, waste water clean-up, industrial water for plant reuse
■ Pre-filtration in applications such as granular activated carbon,
reverse osmosis, cartridge or bag filtration and deionized water
■ 80 psi standard operating pressure (high pressure systems
available)
■ Flow ranges from 10 gpm
Advantages
State of the art fabrication provides added strength under pressure
and long system life
■ ASME code shaped head construction for durability and safety
■ Stainless steel wedgewire underdrain
➤ Ensures structural integrity in the harshest conditions
➤ Hydraulically balanced to increase effectiveness of backwash
while reducing flush frequency and waste of water
➤ High strength stainless steel wedgewire will withstand a collapse
pressure in excess of 600 psi
■ Standard carbon steel products, 3/16" thick material
■ Backwash automatically initiated by elapsed time or pressure
differential
Specification
Model | Number of Tanks | Standard Flow | Filtration Surface Area | Backwash flow (per tank) | |
Min.(m3/h) | Max.(m3/h) | (m2) | m3/h | ||
DMMF-2060-1A | 1 | 2 | 6 | 0.2 | 6 |
DMMF-2460-1A | 1 | 4 | 11 | 0.28 | 11 |
DMMF-2060-2A | 2 | 4 | 12 | 0.4 | 6 |
DMMF-2860-1A | 1 | 5 | 15 | 0.38 | 15 |
DMMF-2060-3A | 3 | 6 | 18 | 0.6 | 6 |
DMMF-2460-2A | 2 | 7 | 22 | 0.56 | 11 |
DMMF-3660-1A | 1 | 8 | 24 | 0.64 | 24 |
DMMF-2860-2A | 2 | 10 | 30 | 0.76 | 15 |
DMMF-2460-3A | 3 | 11 | 32 | 0.84 | 11 |
DMMF-4860-1A | 1 | 14 | 43 | 1.13 | 43 |
DMMF-2860-3A | 3 | 15 | 45 | 1.15 | 15 |
DMMF-3660-2A | 2 | 16 | 48 | 1.28 | 24 |
DMMF-5660-1A | 1 | 19 | 58 | 1.54 | 58 |
DMMF-3660-3A | 3 | 24 | 73 | 1.92 | 24 |
DMMF-4860-2A | 2 | 29 | 86 | 2.26 | 43 |
DMMF-5660-2A | 2 | 38 | 116 | 3.08 | 58 |
DMMF-4860-3A | 3 | 43 | 129 | 3.39 | 43 |
DMMF-4860-4A | 4 | 57 | 172 | 4.52 | 43 |
DMMF-5660-3A | 3 | 57 | 174 | 4.62 | 58 |
DMMF-4860-5A | 5 | 72 | 215 | 5.65 | 43 |
DMMF-5660-4A | 4 | 73 | 232 | 6.16 | 58 |
DMMF-4860-6A | 6 | 86 | 258 | 6.78 | 43 |
DMMF-5660-5A | 5 | 91 | 290 | 7.7 | 58 |
DMMF-5660-6A | 6 | 109 | 348 | 9.24 | 58 |