

Add to Cart
Model LDM-100XY Dual Axis Laser Diameter Gauge Outer Diameter Range 0.2mm to 95mm.
Two-dimensional laser diameter measuring gauge, can Online measurement and control. (Model:LDM-25XY LDM-50XY LDM-60XY LDM-100XY). Professional measuring outer diameter laser diameter gague for wire cable pipe.
Dual Axis laser diameter gauge is the high-accuracy installment
that uses the laser scan to carry is the high-accuracy survey
installment that uses the laser scan to carry on the no-contacts
on-line survey. It (namely X axis and Y axis) simultaneously
measure the diameter in two directions.
Applicable to metal wires, glass, pipes, wire and cable, etc. The
diameter of the measurement and control. Bi-directional
measurement, the average shows that can simultaneously show the
wire, pipe diameter, roundness.
1. Technical parameters
Model | Measuring Range | Resolution | Accuracy |
LDM-25XY | 0.1 - 20mm | 0.001 | 0.001mm |
LDM-50XY | 0.2 - 45mm | 0.001 | 0.002mm |
LDM-60XY | 0.2 - 55mm | 0.001 | 0.002mm |
LDM-100XY | 0.2 - 95mm | 0.001 | 0.002mm |
2. Main Features
① non-contact laser diameter measurement, high speed, high accuracy
and good repeatability.
② Real time outside diameter and roundness display, improve quality
control and production efficiency, reduce the waste of materials.
③ Various digital and analog control signal functions, to achieve
fully automated production.
④ Various preset functions,nominal value, the upper and lower
tolerance, alarm control presets, easy to operate.
⑤ Standard data port connection ready,compatible software for data
analysis development convenience.
3. The performance indicators
Measurement: Laser scanning
Laser: Visible red semiconductor laser
Laser output power: <2mW
Operating voltage: ~ 220V plus/minus 15% 50 - 60Hz
Operating temperature: -10 ~ 40 Degrees Celsius
Humidity: <85% RH
Work mode: continuous
Power consumption: <30W
Dimensions: LDM25XY/LDM50XY Gauge head: 420mm * 400mm * 85mm
LDM60XY Gauge head: 380mm * 380mm * 60mm
Stand: 350mm * 200mm * (700-1000)mm
Height of central measuring position: 900-1200mm
4. Main Controller Features
1. It be used to remote display and control.
2. It Can control the speed of DC motors, VVVF motor(extruder or
the tractor).
3. It's suitable for Laboratory use.
4. It will alarm,when the diameter go beyond the the set tolerance.
5. With RS485 It can connect to PLC industry controlling computer.
6. Dimensions: 100mm×100mm×120mm (Model:DDC-5)
LDM Series Gauge is the classic Mercury-Tech product series, with decades of technological innovation and more than 1,000 customers use these products, high accuracy, reliable product. Currently it is the wire, cable, pipe measurement's best choice.