COB LED Par Spotlight GU10 3W 110V , Dimmable IP40 Led Cob Spot Light

LED COB GU10 3W 110V Dimmable Spotlight Build-in Driver Full Transparent Glass Wholesale 3 years warranty Package custom

Product Parameter:


Model: SKLEDSL-608-3W
Power: 3W
Size: 56*50mm
Base: GU10
Chip: COB
Efficiency: >90lm/w
Color Temperature: 3000K Warmwhite
4000K Day White
6000K Cold White
CRI: >80 Normally >90 Also available
Voltage: 85V-265VAC Non-dimmable
220VAC Dimmable
110VAC Dimmable

Please tell us your voltage choice when place order.





Application Of LED SpotLight:

COB LED Spotlight bulbs measure just under 4 inches in diameter allowing them to fit into 4 inch recessed can lights and spotlight fixtures too small .
Short neck bulbs are specially designed for shallow fixtures, so these are often used for track lighting.

Some bulbs are UL listed for wet locations, meaning they can be used outdoors and do not require protection from direct exposure to water.

Look for the Safety Rating in the Specifications of each product page if this is important to you.
Many of the bulbs are also dimmable when paired with a compatible LED dimmer.

Because not all Spotlight LEDs work with all LED dimmers, each bulb has a Dimmer Compatibility PDF under Brochures and Spec Sheets so that you can make sure your new lights will work with your existing dimmers.

Need some help finding the right product for your installation? Give one of our lighting experts a call. We'll be happy to walk you through all of your options.

Features of LED GU10 SpotLight:

1. GU10 LED bulbs are an energy efficient replacement for halogen bulbs.
To help you find the right replacement, the category is broken out by halogen wattage equivalent.


While the up-front cost of LEDs is higher than halogen bulbs, they need to be replaced far less frequently.

With halogen bulbs only lasting 1500 to 2000 hours, an LED Spotlight that lasts 35,000 hours is a worthy investment.
You would need to replace a halogen 17-23 times before replacing one LED bulb.

2. LED Lights Short Neck LED Beam Angles and Color Temperature
shaped bulbs are often used for more controlled directional lighting compared to BR shaped bulbs or for general illumination.

3. GU10 short neck LEDs give you a wide range of options categorized as follows:

Narrow Spot: less than 10 degree beam angle
Spot: 12/24/36 degree beam angle
Narrow Flood: 25 degree beam angle
Flood: 36 degree beam angle
Wide Flood: greater than 50 degree beam angle







4. Color temperature is a measure of how yellow or blue a light the bulb puts out.
This is another advantage of using LED lighting over halogens, which can only produce light in the 3000 Kelvin range.
LEDs give you more flexibility to choose how warm or cool a light to use in your displays.

Higher Kelvin temperatures appear crisper, brighter, and are on the blue end of the Kelvin scale. Lower Kelvin temperatures are warmer, closer to the light output from a halogen or incandescent bulb.

A 3000 Kelvin is the closest direct replacement for halogen if you want to keep that familiar look.

We recommend 3000 Kelvin and lower for landscape lighting because flowers, grass, and trees will look unnatural under the higher Kelvin light while it matters less for statues and stonework.

For display lighting or track lighting, higher temperatures may be used, but we recommend sticking to the lower Kelvin bulbs for recessed lighting or ambient lighting.

5. High CRI Bulbs
Another measurement that changes the appearance of the light from your bulbs is CRI, a measure of how accurately a light bulb displays colors compared to the midday sun.

LED PAR Light SMD Bulbs with a higher CRI provide a more vivid light, especially reds and flesh tones.

Although LEDs cannot yet match the 100 CRI of halogen bulbs, a CRI of 90 or above is considered
e


Maintenance / Repairing Instructions:
1.Make sure LED GU10 Light has been turned off before maintenance or repairing.
2.Clean the LED COB spotLights cover regularly to maintain high transmission of light.
3.Clean up the LED GU10 Spot Lamp dust from the cover and heatsink regularly to keep sound heat dispersion.
4.Be careful not to use water or corrosive solution for cleaning LED 3W GU10 Full glass Light, preferably with a dry cloth.(It is not Waterproof tubes,These LED Lights IP40, forbit to use with rainy or water).

Tongxiang Shineknot Lighting Co., Ltd. produces non-inductive lamps, grille lamps, induction lamp lamps and LEDs, which are popular in the consumer market and enjoy a high status among consumers. The company has established long term stable cooperative relationships with many retailers and agents. Tongxiang Shineknot Lighting Co., Ltd. sells non-inductive lamps, grille lamps, induction lamp lamps, LEDs with reasonable prices. Tongxiang Shineknot Lighting Co., Ltd. has strong strength, credit, contract and quality assurance. It has won the trust of customers with its multi-variety management features and the principle of small profits but quick turnover.

Tongxiang Shineknot Lighting Co.,Ltd built in 2010. All the time, it is focused on Led highbay light, LED Floodlight, LED Shoebox Light, LED Ceiling lamp, LED Par light, Induction lamp , ect. Exported to European and USA, Asia, Australia, South American , Middle East.

Our company advantages:

1. professional Lighting Trading sale service

2. Plenty different lights for your choice.

3. High quality always

4. Quick quotation

5. Short lead time

6. Professional exporting and importing experience

Welcome to view our website and also enjoy working together.