High Accuracy RF Level Meter DVB-C QAM Analyser LM870-WFD 5-870Mhz Radio Frequency Meter

5-870Mhz Hand-Hold RF Level Meter Field Strength Meter DVB-C QAM Analyser LM870-WFD

Feature:

● Support both DVB-C Signal and CATV Analogue signal test
● More easy installation for DVB-C&CATV project
● Average peak power, MER,BER, C/N, EVM and Constellation diagram of DVB-C measurable
● Trunk-line AC voltage, V/A, C/N and TILT measurable
● Automatic scanning, Automatic channel-filtering and Automatic error-operation amending for analogue test
● Spectrum displaying
● Automatic over-voltage shut-off protection
● AC/DC optional (Ni-H/Li storage battery inside)
● Full-digital key-board operation, direct freq. & channel input
● All standard analogue channels and subjoin channels pre-set inside
● Level test error Correct
● Channel edit function by manual or Automatically operation.
● New channel-table setting according to user’s special requirement
● High quality big size LCD display
● English/Chinese operation interface
● Audio output (speaker set-in)

Level:

● Frequency Range: 46-870MHz

● Resolution Bandwidth: 280KHz ± 50KHz

● Channels: Full Channels

● Level Range: 35dBμV - 115dBμV

● Accuracy: ±1.5dBuV (under room temperature)

±2.5dBuV (- 10 - +40℃)

● Input impedance 75Ω(BNC or F connector)

● Wave detection Peak value

Auto Scan Testing:

● Max. Channel Scan: 100 Channels

● Scan Range: Full Channels within 46--870MHz

● Scan Speed: 30 Channels/Min

● Memory Groups: 23 Groups(00--22) Each group store Max 100 Channels.

Voltage:

● Voltage Range: 0 -- 100VAC

● Accuracy: ±1.5V

● Resolution 0.1V

C/N:

● Level Range: 80dBuV – 105dBuV

(Test result is only for reference, not very accuracy)

Others:

● Dimension: 215mm x 95mm x 47mm

● Weight: 610g (Without charger)

● Working Temperature: -10℃ ~ + 40℃

● Display LCD: 128x64 Matrix Super big LCD with back light

Power:

● DC Supply: DC 7.2V/1.6Ah rechargeable battery

● AC Supply: AC 220V/50Hz±10%

● Battery working hours: longer than 4.5 hours at continuous working mode

● Recharging hours: 12 ~ 14 hours.

Accessories:

● Battery Charger: Charger 1pc

● RF Input Port: F type 2pcs

● User Manual 1 copy

Specifictaions of DVB-C Signal Test :

Cabsat Industrial Limited is a high-tech enterprise base on Jiuzhou Group since 2004, and professional manufactory for optical fiber communication products, digital products, test instruments, etc.

We have a passel faithfulness and excellent engineers, and service team, and established long term cooperation with many overseas customers. Most of products sold to southeast Asia, Europe, South America, Middle East, etc.

Our main products include xPon system, Docsis Cable modem series, FTTH accessories, HFC broadband,Digital products, Test instruments, etc.

Enterprise Belief:

Quality is life

Sincerity is footstone

Innovation is soul

Service is source.