Trailer Power Supply Converter Power Inverter Charger 12VDC 24VDC AC DC
Brand Name:TBB
Certification:LVD-EN60335-1,EN60335-2-29; EMCEN55014,EN61000
Model Number:BS1210, BS1240
Minimum Order Quantity:1piece
Delivery Time:5-30 days based on order qty
Payment Terms:T/T
Contact Now
Add to Cart
Active Member
Location:
Xiamen Fujian China
Address:
#15 ShiShan Road, Haicang District, Xiamen China 361027
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Trailer power supply converter charger 12VDC 24VDC AC DC manufacturer
AGM,battery BS1210 converter charger automatice voltage compensation charging
TBB TRIDENT series Smart battery charger on board charging for mobile marine application
Use BS battery charger only in well ventilated rooms. Do not expose
the charger to rain, snow,
spray, or bilge water. To reduce risk of fire hazard, do not cover
or obstruct the ventilation
openings. Do not install the charger in a zero‐ clearance
compartment.
The battery temperature and voltage sensor supplied with BS charger
measures the
temperature of battery
and automatically makes adjustments at real time to properly charge
your batteries at
compensation rate of – 4mv / / cell.
Features :
- Active PFC featuring smaller and higher efficiency, max 92%.
- With multiple isolated outputs, including slave charger for starter battery.
- Automatically work as power supply or charger.
- Automatic temperature compensation charging.
- Automatic voltage compensation charging.
- Programmable with monitor.
- Night mode through remote control.
Specs
| Model | BS1210 | BS1225 | BS1240 | BS1225-3 | BS1240-3 |
| Electrical | |||||
| Output voltage (PS mode) (Vdc) | 12.8V±0.256Vdc | ||||
| Max Output current (A) | 10 | 25 | 40 | 25 | 40 |
| Nominal input voltage (Vac) | 85-265VAC,50/60Hz | 165-265VAC,50/60Hz | |||
| Charge algorithms | 5 steps. soft start, bulk, absorption, float, recycle | ||||
| Temperature compensation | Automatically | ||||
| Absorption voltage(Vdc) | AGM:13.5V,GEL:13.5V,LFP:13.5V,WET:13.7V | ||||
| Floating voltage (Vdc) | AGM:14.4V,GEL:14.1V,LFP:14.4V,WET:14.7V | ||||
| Charging current (A) | 10 | 25 | 40 | 25 | 40 |
| Min battery voltage (Vdc) | 1 | 2 | |||
| Efficiency | 88% | ||||
| Input connector | Cable of 1.5 meter with CEE 7/7 plug | IEC socket | |||
| Output connector | Fixed cable,2.5mm², 1 meter | M4 Screw (16mm²) | |||
| Output | 1 | 1+1 | |||
| Ripple noise | ≤200mVp-p | ||||
| Regulation Accuracy | ≤2% | ||||
| Cooling | Self cooling | Fan cooling | |||
| Working Temperature | -20℃ -- +60℃ | ||||
| Protection | |||||
| Short circuit | Shutdown output, automatically restart when short circuit is removed | ||||
| Reverse polarity | No charging | ||||
| Charger over temp | Shut down the charger | ||||
| Battery over temp | Shut down the charger | ||||
| Standards | |||||
| LVD | EN60335-1,EN60335-2-29 | ||||
| EMC | EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3 | ||||
| Structure | |||||
| Out case | Aluminum+plastic | ||||
| Dimension | 175*114*53mm | 249*165*74mm | 249*165*74mm | ||
| Weight | 1.0KG | 1.6KG | 1.6KG | ||
| IP class | IP20 | IP23 | |||
| Insulation Resistance | ≥50MΩ | ||||
| Dielectric strength | I/P-O/P:3.0KV,I/P-PG:1.5KV,O/P-PG:0.5KV | ||||
Installation
BS Charger can be installed on a horizontal surface or vertically on a wall. Please see following instruction;
Trailer Power Supply Converter Power Inverter Charger 12VDC 24VDC AC DC
Inquiry Cart
0