30A 15A Euro 6 MPPT Power Converter Charger For Cars
Brand Name:TBB
Certification:E-Mark/E4-10R
Model Number:DX1230/DX1215
Minimum Order Quantity:1piece
Delivery Time:5-30 days based on order qty
Payment Terms:T/T
Contact Now
Add to Cart
Active Member
Location:
Xiamen Fujian China
Address:
#15 ShiShan Road, Haicang District, Xiamen China 361027
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
30A/15A Euro 6 Converter Charger for cars, Lithium battery charging
TBB Brand NEMO Series Booster Charger
Nemo battery to battery charger is a simple but perfect in vehicle
charging solution. It draws
power from alternator to perform quick and reliable charging of
auxiliary batteries while you
are driving or stationary via solar. Compatible with Euro6
vehicles, Nemo maintains charge
with a stable output even with variable voltage “smart
alternators”, to ensure your battery
receives a full charge in the shortest time without concerns about
overcharging or
undercharging which can reduce life cycle of your batteries.
RS485 cable can be connected to a PC monitor or a controller
to view some working information of the charger. The RS485 protocol
can be obtained from
our sales team if needed, please contact your local distributor.
Features
- Right charging solution protect your auxiliary battery by regulating voltage and control current
- TBB premium II multistage charging algorithm for various battery chemicals including LPE
- Built in automatic temperature and voltage compensated battery charging
- Compatible with Euro6 Engine
- With function of battery isolation, protecting starter battery
- Dual input model with built in solar charge controller(MPPT) is available
- Support auxiliary battery (AGM, GEL and WET) low voltage (under 2V) detect beforethe charger charging and LFP wake-up with continuous output.
- Supporting parallel to increase power
- Model with 12Vdc input and 24Vdc output is available
- IP65 without fan for convenient installtion
- Provides maintenance solar charge to starter battery when auxiliary battery is full.
- Suitable for supporting loads up to maximum output rating while on the move.
With both PV and Alternator input
With Alternator input
Materials:
The unit is supplied with the following materials. Please confirm
the serial number on
charger is same to that on outer carton.
- NEMO battery to battery charger.
- User manual.
- Sensor / Ignition / RS485 (model dependent for IDX and IDDX).
Specifications
| Model | DX1225 | DDX1225 |
| Electrical | ||
| Input nominal voltage | 12VDC | |
| Alternator input voltage range (smart type) | 12-16VDC | |
| Alternator input voltage range (conventional type) | 13.2-16VDC | |
| Automatic activation -D+ | yes | |
| MPPT | N/A | yes |
| PV input voltage range | N/A | 12-25VDC |
| Output nominal voltage | 12VDC | |
| Charge current | 25A | |
| Efficiency | max 97% | |
| Termperature compensation | yes | |
| Voltage compensation | yes | |
| Charge algorithm | TBB premium II multi stages | |
| Protection | Battery charger over temperature/ Battery over temperature/ Over load/ Short circuit | |
| Operation temperature | -20C-60C | |
| Enclosure | ||
| Material | Aluminum with anodized, flame proof plastic | |
| Battery connection | M8 | |
| Protection category | IP63 | |
| Weight | 0.8kgs | |
| Dimension | 186.3*102.3*60mm | |
| Standards | ||
| Safety | EN60335-1, EN60335-2-29 | |
| Emission | EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3 | |
30A 15A Euro 6 MPPT Power Converter Charger For Cars
Inquiry Cart
0