Laser Pumping TO Can Laser Diode 300mW Output Power Medical Use With PD

808nm wavelength, 300mW output power TO-56 Package Laser Diode with PD​

HTOE's LDM-0808-300m-79 is a TO56 packaged laser diode with photodiode (PD). The laser emits 300mW optical power with CW mode at 808nm wavelength. LDM-0808-300m-79 is sealed by standard TO-56 package with a flat window. The internal PD can make user to integrate more functions in their systems more easily. Featured and benefited a high reliable operating and a narrow emitting width 40µm, LDM-0808-300m-79 allows to operate with a high quality laser beam, It's ideal for pumping Nd:YAG and illumination applications.

LDM-0808-300m-79 belongs to HTOE's LDM series, which based on Quantum-well epitaxy and ridge waveguide structure design. HTOE packaged single emitters provide excellent reliability and performance. Center wavelength includes 635nm, 650nm, 670nm, 785nm, 808nm, 830nm, 9xxnm and 1064 nm. Package designs include TO mounts, CoS mounts, C-mounts and F-mounts. Provide beam shaping services like fast-axis compression according to customer demands.

Features

· 808nm center wavelength

· 300mW output power

· Integrate with Photodiode

· High electro-optical effiency

· High reliablity

· With standard TO-56 package

Applications

· Laser Pumping

· Medical

· Illumination

Parameters(25℃)

Package Information

TOØ56 Package

Function Curve


P-I-V Curve Spectral Curve

Notice

1. Item model notice: LDM (Item model), **** (Center wavelength), **** (Output power), ** (Heat sink structure and item width).
2. Data in the sheet are all based on TOØ56 package testing.
3. For more information, please contact Hi-Tech Optoelectronics Co., Ltd.

ESD Cautions

The primary cause of diode failure is unexpected electrostatic discharge. To help prevent device failures, be sure to handle devices with extreme care. Users should always wear an ESD wrist strap, ground all applicable work surfaces and follow anti-static techniques when handling diode lasers.

Operating Considerations

Operating the diode laser outside of its maximum ratings may present a safety hazard or cause a device failure. Additionally, excessive drive current or switching transients can damage CW diode lasers. DO NOT exceed the maximum peak optical power. Before turning the power supply on, connect the component to the power supply and ensure the output voltage value is zero. After the component has been successfully connected, increase the current slowly and monitor both the output power and drive current. Device degradation accelerates with increased temperature; therefore, careful attention to minimizing the case temperature is advised. A proper heat-sink for the diode laser on a thermal radiator will greatly enhance laser life.

Hi-Tech Optoelectronics Co., Ltd. is a wholly-owned subsidiary of CECEP, is a high-tech enterprise established on the basis of National Optoelectronic Engineering Research Center.

• Established in 1999
• Registered Capital：227 million RMB
• Located in Shahe Industrial Park, Beijing
• Employees：~180
• Products: Semiconductor Lasers

Headquarter in Beijing：

• Over 3000m² of manufacturing space, and more than 1500m² clean room with class 1,000 and 10,000 ；
• The new factory planned with 11,000m², and under construction now.

R&D Platform

• National Optoelectronic Engineering Research Center
• Post-doctoral Research Center
• Engineering Technology Research Institute Optoelectronics Branch of China Energy Conservation Group

More than 30 core patents：

• Ep-Wafer Structure Design
• COMD control
• Electrode process
• Chip process
• Chip packaging
• Beam shaping
• Fiber coupling

Leading provider of laser diodes and laser-based solutions in China.