Ptfe Grid Disposable Millipore Membrane Filter 0.45 Um

automatic ptfe membrane filter grid disposable NYLON PTFE 0.45μm for Pharmaceutical

Application of folding drinking water
Among MF, UF, NF, and RO, there is no use for RO except for RO for desalination. RO almost removes all salts. After treatment, the water becomes pure water without any salt, even purer than distilled water. Of course, such water cannot be used as drinking water. If it is used, it is necessary to add salts that are beneficial to human health. To meet this requirement, there is no condition to do it. The removal of salt by NF is second only to RO, but the removal rate is also very high. It is generally used as soft water, and it is not suitable for drinking water for the above reasons. Therefore, the membranes used for water purification treatment should be MF and UF membranes. With such a membrane, colloids and plankton can be removed, insoluble iron and manganese can be removed, and fungi can be removed. But in order to prevent bacteria from regenerating in the clean water tank, the sterilization process cannot be omitted. Taking into account the molecular weight of UF removal substances, it is unable to remove ozone substances and organic solvents such as trihaloethylene. These solvents will form a thin film on the membrane surface. These thin films may be removed in the future, which can be listed in the future. the study. In terms of membrane type, membranes such as external pressure hollow system or tubular type are suitable for use. If an external pressure membrane is used, the raw water passing through the grit tank can be directly connected to the membrane for treatment. The raw water directly connected to the plate and frame type and spiral type membranes, in order to prevent the membrane pores from being blocked, the floating substances in the raw water should be removed before flowing into the membrane.

Product introduction

The contiguous membrane is a kind of continuous strip-shaped packaging microporous membrane used in the field of biotechnology for liquid filtration during the testing process in the pharmaceutical or beverage industry, CDC, food industry, cosmetics and chemical industry.

It is specially used with the YT-DS47 automatic membrane taker. It is triggered by hand induction, and the color code of the continuous film is positioned. The membrane taker automatically removes the sterile packaging of the microporous membrane. It is realized that no manual operation is required, the user's hands are liberated, and the diaphragm is not in contact with other objects in the process of being distributed, thereby avoiding the risk of contamination.

Each box contains 150 filter membranes. The filter membranes are individually sealed in a special folding tape package. The design makes the filter membranes easy to open and seal for storage.

Scope of application

◆Pharmaceutical industry: microbial limit inspection of purified water, water for injection, raw materials and oral liquids, tablets, capsules, biological products and preparations

◆CDC: Check the total number of colonies in air-conditioning condensate water, drinking water and other water quality, and detect pathogenic bacteria

◆Food industry: check the total number of bacterial colonies in beverages, mineral water and purified water

◆Cosmetics and chemical industry: various water sample inspections that need to be tested for microorganisms

order information

WHO WE ARE

Hangzhou WINTEAM Scientific Instrument Co., Ltd. is a key high-tech enterprise in Hangzhou China, which is a national high-tech enterprise integrating R&D, production, sales and service. The company's current main two departments:

Microbial departments

traffic departments.

WHAT WE DO

MICROBIAL DETECTION

• Sterility Test Canister
• Vacuum Filter Manifold
• Sterility Test Pump
• Sterility Test Isolator
• Hydrogen Peroxide Sterilization Equipment
• Microporous Membrane Filter
• Membrane Filtration Assembly
• Quality Control Strains
• Sterile Petri Dishes
• 
• 

TRAFFIC MACHINE

WINTEAM is a leader in the license plates production and systemic solutions provider in china. Our machine list is constantly expanded and currently includes

• License Plate Production Line
• Customized Automated production line for number plates
• Embossing press NFC Secure
• hot stamping NFC Secure
• Manual hot stamping/Automatic hot stamping
• Manual embossing press/Automatic embossing press
• materials and components for the production of license plates
• License plates shredders
• comprehensive systemic solutions in the field of vehicle registration
• Accessories and additional tool

Why choose WINTEAM

As a company that seize more than 90% china licence plants hot stamping market and half of Chinese sterility market, and about 200 professional stuffs to service to you,25 employees in R&D.

WINTEAM has abundant experience and enough Production capacity to Satisfy customer’s license plate & machinery demand.

Professional after-sales staff 24hours