

Add to Cart
Ultra Fine Homogenizer Dispersing Emulsifier Solid/Liquid Mixer 10000-20000rpm
The whole machine is simple in design and simple in structure. The
homogenizing cup and the mixing knife, the connection between the
homogenizing cup and the main car are convenient and quick, easy to
operate, saving time and effort (one mode is evenly uniform for
more than 10 seconds), and the maintenance is simple.
The highlight of the WinTeam homogenizer is that the transparent
cup ensures uniform uniformity of each package; batch batches can
be mass-produced; cups can be quickly and easily connected to the
mainframe, which is widely used in the home. Animal tissue,
biological samples, food, pharmaceuticals, cosmetics, agricultural
products, solid, semi-solid and water insoluble samples. It is
especially suitable for the preparation of microbiological test
samples, so the process of extracting bacteria from the above
samples is very simple and quick. Simply add the sample and diluent
(or emulsifier) to the sterilized cup and press the cup. Open it
on the homogenizer. Patent No.: 9370.2.
The following are the advantages: 1. The cup is made of special
engineering plastic, high temperature resistant to 128 ° C, can be
used repeatedly for sterilization; the material is transparent, and
the homogenization conditions can be observed at any time during
the work.
The homogenized cup is divided into a large cup and a small cup,
the small cup is specially cooked with 100 ml of mash, the large
cup is specially put into 100 ml, 200 ml, 225 ml, 250 ml, and the
convenient use of the mark (using a large cup) - - Take about 25
grams directly into the cup, add 250 ml of homogenate to the
diluent or add 225 ml of diluent, add 25 g of sample homogenate;
for samples that are not homogenized for 1 minute, take 25g, add
100ml Diluent, even add 250ml of diluent. Use a small cup----put 10
g of the sample directly into the cup and add it, dilute to 100 ml
homogenate. Homogenize and prepare a 1:10 solution to accurately
eliminate the cylinder. A special lid can be used to sterilize the
thinner in the cup, eliminating thinner containers and saving the
sterilizer.
A group of cups without cross-contamination.
the anti-lock seal is located at the lock between the bracket and
the cup body, and the sealing performance is good.
The weight of the main unit is light (the main unit weighs 0.9 kg
and the cup holder weighs 0.13 kg). It is easy to move. It has four
suction feet and is stable when working.
The whole machine is simple in design and simple in structure. The
connection between the cup and the knife holder, the cup and the
engine is quick and easy, easy to operate, saves time and effort,
is quick and easy, and is easy to maintain.
In short, the homogenizer has the advantages of being easy to use,
practical, simple and inexpensive.
Power supply: | AC220V/50Hz |
Power: | 60W |
Speed: | 10000 ~ 20000rpm |
Timing: | 0 ~ 300S |
Homogenized cup capacity: | ≤300ml |
Homogenized cup body material: | polycarbonate (PC) |
Homogenizer base material: | polymer alloy |
Seal material: | silicone |
Upper coupling material: | fluoro rubber + stainless steel |
Homogenization cup sterilization: | whole moist heat sterilization |
Size: | 24*18*24cm |
Weight: | 4.4kg |
It can be used for pulverization, homogenization and emulsification of solid, liquid and oil agents for medical, pharmaceutical, cosmetic, food and microbiological tests.