Ftth 4ge 1 Power Port Xpon G Epon Onu Ont Fiber Optical Equipment
Brand Name:KEXINT
Certification:CE/ROHS/ISO9001
Model Number:KXT-GPB200
Minimum Order Quantity:1 piece
Delivery Time:8
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Site Member
Location:
Shenzhen Guangdong China
Address:
5th Floor, Building 2, Chunhu Industrial Zone, Pinghu, Dongshen Road, Longgang District, Shenzhen, Guangdong, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Note: We can provide samples for free
Product features:
1. Comply with ITU-T g.984 standard
2. Comply with H.248, MGCP and SIP protocol standards
3. Comply with 802.11 n / B / g protocol standard4. It supports layer 2 switching of Ethernet services and line
speed forwarding of uplink and downlink services
5. Support frame filtering and suppression6. Support the standard 802.1Q VLAN function and VLAN conversion
7. 4094 VLANs supported
8. Support dynamic bandwidth allocation
9. Support PPPoE, ipoe, bridge and other services10. Support QoS, including service flow classification, priority
marking, queuing and scheduling, traffic shaping and traffic
control
11. Support 2.6.3 IgM snooping
12. Support Ethernet port speed limit, loop detection and layer-2
isolation
13. Support power failure alarm
14. Support remote reset and restart functions
15. Support the function of restoring factory parameters
16. Support data encryption
17. Support status detection and fault reporting
18. Support power lightning protection
19. support GPON / EPON dual mode
Port characteristics:
1. PON: connect the OLT equipment at the source end through the optical fiber line
2. Ethernet port: connected to user side equipment through twisted
pair network cable, lan 1 port speed is 10 / 100 / 1000 m,
adaptive, lan 2 - lan 4 Port rate is 10 / 100 M adaptive
3. Reset button: restart the equipment; Press and hold for more
than 3 seconds and the system will return to the factory default
4. Led button: LED indicator on / off
5. Power switch: power on / off
6. Power interface: connected to external power supply
Optical properties:
1. support wavelength division multiplexing technology, single
fiber dual wave bidirectional transmission
2. interface type: SC / APC or SC/UPC
3. maximum spectral ratio: 1:128
4. rate: uplink 1.25gbps, downlink 2.5Gbps
5. transmission wavelength: 1310 nm
6. receiving wavelength: 1490 NM
7. output optical power: - 1 ~ + 4dbm
8. receiving sensitivity: < - 27dBm
9.The longest distance between OLT and ONU is 20km
Physical properties:
1.Power supply: 12 V / 1 A
2.Operating temperature: - 5 ~ 55 ℃
3.Storage temperature: - 40 ° ~ 70 °
4.Chassis specification: 250 * 140 * 80 mm (length * width *
height)
Ftth 4ge 1 Power Port Xpon G Epon Onu Ont Fiber Optical Equipment
Inquiry Cart
0