

Add to Cart
EPD DRIVE PINS SHOOTING NAIL WITH RED FLUTE POWER ACTUATED FASTENERS CONCRETE STEEL NAILS
1. Mechanical Properties
These .300 DRIVE PINS are manufactured from C-1060 steel and austempered to a core
hardness of HRC 52 to 56.To insure ductility,these .300 DRIVE PINS are bend tested during Quality Control inspection
to about 60 degrees.
2. Corrosion Resistance:
These .300 DRIVE PINS are designed to be used in a non-corrosive
atmosphere unless application specific corrosion testing has been
performed.The standard for this .300 DRIVE PINS is applied zinc meeting the international
requirement providing an average thickness of 5 micron(0.0002")with
no supplementary coating.
3. Shoot Test:
These DRIVE PINS received the acceptance inspection by shoot with
power actuated tool for penetrating A3 steel plate of 8mm
thickness.
Model | Length | Kg/100pcs |
EPD13P10 | 1/2"K | 0.21 |
EPD16P10 | 5/8"K | 0.23 |
EPD19P10 | 3/4"K | 0.26 |