

Add to Cart
ATECH PL301 SDI-12 RS485 Digital Submersible Diesel Pressure Level Sensor
PL301 liquid level transmitter is based on the principle that the static pressure of the measured liquid level is proportional to the height of the liquid level. It converts pressure into an electrical signal using the piezoresistive effect of diffused silicon. After temperature compensation and linear calibration, it is converted into standard current, voltage, RS485 and other signal outputs, and can be directly connected to PLC/DSC, display instruments, computers, etc., with good stability and reliability. OEM oil-filled cartridges are housed in stainless steel housings. The front-end protective cap plays the role of protecting the sensor diaphragm, and also enables the liquid to contact the diaphragm smoothly. The waterproof line is sealed with the shell, and the air pipe in the cable is connected with the outside world. Internal structure anti-condensation design. HDL300 is equipped with a micro-signal processing circuit for long-distance transmission. HDL300 is widely used in liquid level measurement and control in fields such as environmental protection, water conservancy, and variables.
Feature of Water Level Sensor
● Long life
● Diffused silicon oil-filed sensor cell
● CE certificate
● Reinforcement cables optional
● Intrinsically sate ,explosion proof
Specifications of Water Level Sensor
ssure medium | liquid compatible stainless steel |
pressure ranges | 0~1 m H2O...300 m H2O |
overload pressure | 150%FS |
output signal | 4~20mA, 0.4 ~4.5V, 0~5V, RS485, RS232, 868 Mhz 4~20mA+Hart |
accuracy | 0.1%FS,0.25%FS,0.5%FS (standard) |
load resistance | RL = (U-10)/0.02(Ω) (4~20mA current output), >20KΩ (voltage output) |
long term stability | 0.2%FS/year |
supply voltage | 10~36VDC |
compensated temperature range | -10~70°c |
operating temperature range | -20~85°c |
storage temperature range | -40~125°c |
temperature coefficient of zero | ±0.015%FS/°c@25°c |
temperature coefficient of span | ±0.02%FS/°c@25°c |
insulation resistance | 100MΩ@ 250VDC 100MΩ@ 500VDC |
Pressure connection | screw thread, throw-in type |
Protection grade | IP68 |
material of wetted part and housing | 304SS or 316L |
material of pressure membrane | 316L |
Response time | 1ms |
Description PL301 Submersible level transmitter
The PL301 submersible level transmitter/hydrostatic level sensor is
designed for use in rivers, reservoirs, storage tanks, boreholes,
vessels and channels. They have long-term immersion protection to
100 meters and are also ideal for measuring pressure in submerged
pipes and vessels.
For applications with aggressive media such as seawater or
leachate, especially landfills, we can offer submersible level
transmitters in high-grade duplex stainless steel with extremely
high corrosion resistance.
Electrically interface with hydrostatic level transmitters using
triple-sealed back-end assemblies and custom vented PUR cables.
This provides the barometric pressure reference and guarantees IP68
integrity to a water depth of 100m.
The standard level transmitter output is a two-wire 4-20mA signal
with a surge protection circuit that reduces the effects of
electrical transients caused by nearby lightning strikes and power
fluctuations. For applications using a data logger, a ratiometric
version is available which provides a 0.5-4.5Vdc output from a 5Vdc
supply.