Product Details
Contactless Tank Liquid Radar Type Level Sensor Radar Level Transmitter Specification Measurement
hot sale oem radar fuel tank level detectorl meter sensor
Radar level sensor emits a very narrow microwave pulse, the pulse to the speed of light in the space, encountered the surface of the measured medium, part of its energy is reflected back, the same antenna to receive. The time interval between the transmitting pulse and the receiving pulse is proportional to the distance from the antenna to the surface of the measured medium to calculate the distance from the antenna to the surface of the measured medium.
Radar level sensors are mounted above the liquid level on the top of the tank, or on a platform that spans the top of the open tank.
Speifications
|
Housing: | Steel 316L | |
Seal ring between housing and housing cover | Silicone |
view Point window on housing | Polycarbonate |
Ground terminal | Stainless Steel |
Power: | Two-wirc | standard version | (16~36) VDC |
Intrinsic safe version | (21.6~26.4) VDC |
Power consumption | max.22.5mA |
Ripple allowed | |
—<100Hz | Uss<1V |
—(<100~<100K)Hz | Uss<10mV |
Four-wire/two | intrinsic safe+explosion proof | (21.6一26.4) VDC, |
-chamber | Power consumption | max.1VA,1W |
Cable: | Cable entry/plug | one cable entry of M20x1.5,one blind of M20x1.5 |
Spring Connection terminal | Application for cables with cross section of2.5m㎡ |
Output: | Output signal | 4~-20mA/HART |
Resolution | 1.6 μa |
Fault signal | Constant current output:20.5mA; 22mA; 3.9mA |
Integration time | 0~50 seconds,adjustable |
Blind spot | end of antenna |
Max. measurement distance | 10m |
Microwave frequency | 26GHz |
Measurement interval | about 1 sec.(depend on parameter settings) |
Adjustment time | about 1 sec.(depend on parameter settings) |
Resolution on display | 1mm |
Accuracy | see the diagram below |
Temperature for storage/transport | (-40~80)℃ |
Process tempcrature (probe) | (-40~250)℃ |
Relative humidity | <95% |
Pressure | Max.4MPa |
Vibration proof | mechanical vibration l0m/s3 ,(10~~150)Hz |
FEATURES AT A GLANCE
1.Small antenna size, easy to install
2.Non-contact radar, no wear, no pollution
3.Serious dust environment on the high level meter work has little effect.
4.A shorter wavelength, the reflection of solid surface inclination is better
5.Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.
6.The measuring range is smaller, for a measurement will yield good results.
7.High signal-to-noise ratio, the level fluctuation state can obtain better performance.
8.High frequency, measurement of solid and low dielectric constant of the best choice.


WHY CHOOSE US ??
We have an independent research and development base and production workshop, using imported research and development experimental equipment, equipped with a professional research and development team, mastering core skills and advanced technology, first-class equipment and teams enable us to continuously develop excellent products. For 20 years, our company has focused on level measurement. The accumulation of history has enabled us to have a high-precision (±1mm) fully shielded production line, which has laid a solid foundation for the production of high-quality products. For custom instruments, it only takes 3-7 days from order receipt to delivery. In addition, we are fully dedicated to customized products (OEM). Relying on our fast new product research and development capabilities, short delivery time, and efficient service methods, our company has occupied 50% of the sales market share at home and abroad, with a very high market share, and our products are spread all over the country and the world. We provide high-quality products and professional and perfect after-sales services to customers all over the world at reasonable prices. Customers can contact us at any time after purchasing the product. It is our responsibility to patiently explain the professional knowledge of radar level gauge to customers!


Company Profile

Atech sensor co,. Ltd. specializes in sensor production and sales. The main products
includes pressure sensor and transmitter, Level transmitter
,wireless pressure sensor, wireless level transmitter, ultrasonic
sensor.
As manufacturer, based on technology innovation, good production
capacity and strict quality control, we can meet different
customers' OEM and ODM demands.
As a manufacturer and exporter, we provide the best products with
our rich experience for customers.
Atech sensor is 100% vertically integrated with engineering,
manufacturing, sales & marketing and customer service all
supported from within our one facility. All critical components and
steps in the manufacture, assembly and testing of a Atech pressure
instrument are in our hands and are carefully monitored to ensure
that we meet your critical specifications precisely and
consistently.
Atech sensor has sold our sensors to global customers over 100
countries with the continuous efforts of the international sales.
In North America, South America, Europe, Asia, Africa and Oceania,
our pressure sensors and transducers are working well in the local
environment and help clients to measure and control the fluid gas
and liquid.
In Atech sensor, both sales team and engineer team will work with
you together to figure out the most suitable solution according to
your requirements. Just feel free to contact us, we are ready to
help.
Best Value = High Quality Product + Competitive Price +
Professional Service + Fast Delivery + Long time Insurance