5cm*20m 63g Drywall Mesh Self Adhesive Transparent Tape

Product Description

Fiberglass adhesive mesh is made from C-glass or E-glass woven fabric then coated by acrylic acid copolymer liquid and adhesive glue. It is widely used for Exterior Insulation Finishing Systems (EIFS), Waterproof Roofing and Stone Reinforcement. Repair dry board wall, plasterboard joint, crack of wall and other wall surface breakage. Excellent alkali resistance, durable; high tensile strength and deformation resistance, crack prevention; no deterioration, no foam; excellent self-viscosity, no need to pre-bottom coating, quick, easy to use.

Specification

Application Method:

The use is easy and fast, no pre-plastering required, no bubbles. It is used to cover or repair joints, cracks and holes on walls, roofs, etc.
1. Wall must be clean and dry.
2. Center and apply tape over the length of the joint and pressing firmly.
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough fill the joint crevice. Let dry completely ,then sand slightly.
4. Apply sufficient thin finishing coats to produce a smooth wall surface.
5. Cut of butted do not have a tapered edge. Therefore, special care must be taken to assure proper compound that will require an increased amount of edge feathering.

Advantage

1. Excellent self-adhesive performance;

2. Good performance of alkaline-resistance;

3. High tensile strength and deformation resistance;

4. Sticks well in cold weather

5. Will not be affected by mold

6. Fire resistant

7. Well arranged; Simple and easy to be applied

8 .Clear cut,colorful private Label.

Wuqiang County Huili Fiberglass Co., Ltd produce fiberglass insect screen, fiberglass mesh,polyester/fiberglass pleated mesh,etc.