20" Bowl Industrial Liquid Solid Separation Centrifuge 2 Phase 50/60Hz

20" Bowl Industrial Wastewater 2 Phase Centrifugal Separation Machine

Discharge centrifuge for the effective separation of slurries into liquid-solid phases or liquid-liquid-solid phases, with the application of centrifugal sedimentation principle.

A decanter centrifuge separates solids from one or two liquid phases in one single continuous process. This is done using centrifugal forces that can be well beyond greater than gravity. When subject to such forces, the denser solid particles are pressed outwards against the rotating bowl wall, while the less dense liquid phase forms a concentric inner layer. Different dam plates are used to vary the depth of the liquid the so-called pond as required. The sediment formed by the solid particles is continuously moved by the screw conveyor, which rotates at a differential speed than the bowl itself.

The Centrifuge is for continuous separation of 3-phases systems consisting of two different liquids and one solid. Stock liquid is brought into the bowl of the centrifuge through a centrifugal pump. solids settles into outer larger by the centrifugal force. The settled sediment is pushed into the drying area at the cone of the bowl by rotary difference between spiral and bow land discharged from the outlet.

Details of Water Treatment field

The impurities such as glass and braids in the biochemical sludge from the sludge tank is pulverized and removed. The sludge pump sends the sludge (concentration 0.5~4% or higher) into the centrifuge, and the fully automatic flocculant dosing device adds continuously PAM flocculant solution (concentration 1~3‰) into the feed pipe through the dosing pump for flocculation in the feed pipe and in the vicinity to produce flocculus to be sent into the centrifuge. The dehydrated mud cake is discharged from the drum by a centrifuge, and transported to the outside through the screw conveyor.

The dehydration system is widely used for oxidation ditch, AB, A/O, A²/O, SBR, MBR, anaerobic fermentation, and other processes, as well as urban domestic sewage, municipal sewage, landfill leachate, urban tap water, purified water, and some industrial wastewater of conventional sewage treatment processes. Solid-liquid separation is achieved by a high-performance DE type two-phase high-efficiency centrifuge.

Modern water purification and sewage treatment processes, increasingly strict emission standards, and subsequent treatment of dewatered mud cakes, whether stacked, dried or incinerated, have set higher requirements for key equipment of excess sludge treatment.

Reduce the moisture content of the sediment under the action of spiral high pressure extrusion

High-dryness screw conveyor and drum structure

The dehydration of solid particles relies mainly on strong centrifugal force, high-torque screw extrusion force (pushing torque), and ultra-long solid particle dehydration length. The centrifuge can generate centrifugal force exceeding thousands of G, 30 ~ 50% higher than the screw pushing torque of common centrifuges. The screw pusher torque, and the drum dehydration length is 10 ~ 20% longer than that of common centrifuges.

High torque involute planetary gear differential

The ultra-high pushing torque requires a high-torque involute planetary gear differential as the foundation. The differential equipped on the centrifuge features high torque, high speed, low heat generation, and excellent heat dispersion, which ensure that the centrifuge can be used for a long time and stably.

CIP washing system

The fully automatic control system is equipped with a CIP washing system, which can effectively solve the problem that it is not completely cleaned during the shutdown process and effectively avoid the equipment troubles caused by artificial factors.

Humanized centrifuge configuration

1.Spiral bearing (in the drum, concealed) lubrication technology: the lubricant is filled from the outside of the hood.

2,The hood adopts a hinged opening structure and is equipped with a high-pressure gas strut to assist the opening.

Variable pitch technology

Constant torque control technology

The constant torque control of the centrifuge is the most advanced control mode in the world. The real-time monitoring of the actual output torque of the constant torque variable frequency motor through the high-performance auxiliary inverter is compared with the set torque value, and PID is used to adjust the material pushing speed of the screw conveyor in real time. The centrifuge can achieve continuous, stable, and economic operation.

DC bus constant torque control technology Double-motor double-frequency Conversion common

Three-phase centrifuge model and technical parameters

The length dimension varies with motor power.

Projects photo:

Chengdu ZK Separation Technology Co., Ltd. is a specialized solid-liquid separation equipment company established by Chengdu West Petroleum Equipment Co., Ltd. according to the development needs. Relying on the technical experience of long-term infiltration and accumulation in many fields including petroleum, chemical engineering, tunnel engineering, sewage treatment, mining equipment, etc., we have developed the high-efficiency sewage concentration and dehydration treatment series centrifuge, alcohol production line alcohol stillage treatment series centrifuge, crude oil and kitchen waste harmless and resource-oriented treatment series three-phase centrifuge, medical extract treatment three-phase centrifuge, SOR three-phase sludge separation system, TDU waste sludge thermal desorption treatment system and other multi-field products and their complete sets of technology, and possess a number of inventions, utility models and appearance patents.

ZK Separation always attaches much importance to the cultivation of talents in the chemical engineering and water treatment industries, and connects the frontier technologies such as mechanical analysis, materials science, fluid mechanics, aerodynamics, vibration isolation technology, automatic control technology, and sensor technology with the centrifuge industry. We have the teams of product R&D and manufacturing process engineers who have been working in the key enterprises of separation machinery industry for many years. On the basis of absorbing domestic and foreign advanced technology, and combined with the special features of production technology in various domestic application industries, we pay much attention to the industrial segmentation. We specialize in the design of petroleum, chemical engineering, coal chemical industry, steel, food, resin, fermentation, medicine, excess sludge of water supply and drainage, etc., completing the R&D, manufacturing and sales of dozens of products and auxiliary equipment including the solid-liquid two-phase, liquid-liquid-solid, solid-liquid-solid three-phase with different parameters explosion-proof centrifuge with flammable and explosive liquids as medium and the online real-time centrifuge with adjustable liquid layer. We have various unique techniques such as high-efficiency sewage concentration, dehydration treatment, three-phase separation of crude oil, kitchen waste, sludge and medical extract, wear-resistant energy-saving, explosion-proof sealing and interlock control. Our centrifuge has distinctive advantages including small covering area, simple process pipeline; high degree of automation; high safety protection measures; good on-site operating environment; strong material adaptability; and stable and reliable operation.

Our Company has research facilities and testing benches with complete performance and intact data collection, and the professional production equipment and testing instruments ensure the high-volume, high-quality manufacturing capabilities.

Over the years, our Company has been focusing on the acquisition of advanced equipment and the development of new technology. We have purchased advanced machining equipment from Germany, the United States, Japan and other countries. At present, we own more than 200 various modern processing equipment including processing centers of each link, CNC gantry milling, laser cutting machine, large-scale lathe, boring mill, high-precision grinding machine, plate shearing machine, bending machine, sand blasting and painting equipment, etc.