40G QSFP+ to QSFP+ Passive Direct Attach Copper (DAC) Twinax Cables 0.5m-5m for data center
Brand Name:UTOPTEK
Certification:CE
Model Number:QSFP-40G-PCU1M
Minimum Order Quantity:1pc
Delivery Time:1-2days
Place of Origin:China
Contact Now
Add to Cart
Site Member
Location:
Shenzhen Guangdong China
Address:
No. 10-1, Lane 7, Xuewuxin Village, Jinsha Community, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
40G QSFP+ to QSFP+ Passive Direct Copper Cables
QSFP-40G-PCU1M (or xM)
Product Details:
Features
• Up to 10.3125Gbps data rate per channel
• 4-Channel Full-Duplex Passive Copper Cable Transceiver
• Up to 5m transmission
• QSFP+ conforms to the Small Form Factor SFF-8436
• Maximum aggregate data rate: 40 Gb/s (4 x 10Gb/s)
• Copper link length up to 5m (passive limiting)
• High-Density QSFP 38-PIN Connector
• Power Supply :+3.3V
• Low power consumption: 0.02 W (typ.)
• I2C based two-wire serial interface for EEPROM signature which
can be customized
• Temperature Range: 0~ 70 °C
Applications
- 10 Gigabit Ethernet 4
- 10 Gigabit Ethernet
- InfiniBand4x SDR, DDR, QDR
- 2, 4, 8, 10 Gigabit Fiber Channel
- Fiber Channel over Ethernet SAS,Servers,Hubs,Switches,Routers
- SFP+ DAC, 40G DAC, DAC Cable
General Product Characteristics
| SFP+ DAC Specifications | |
| Number of Lanes | Tx & Rx |
| Channel Data Rate | 10.3125 Gbps |
| Operating Temperature | 0 to + 70°C |
| Storage Temperature | -40 to + 85°C |
| Supply Voltage | 3.3 V nominal |
| Electrical Interface | 38 pins edge connector |
| Management Interface | Serial, I2C |
High Speed Characteristics
| Parameter | Symbol | Min | Typ | Max | Units | Notes |
| Differential Impedance | Zd | 90 | 100 | 110 | Ω | |
Differential Input Return Loss | SDDXX | <-12+2* SQRT (f) with f in GHz | dB | 0.01~4.1GHz | ||
<-6.3+13* Log10/(f/5.5) with f in GHz | dB | 4.1~11.1GHz | ||||
| Common Mode Output Return Loss | SCCXX | < -7+1.6*f with f in GHz | dB | 0.01~2.5GHz | ||
| -3 | dB | 2.5~11.1GHz | ||||
| Difference Waveform Distortion Penalty | dWDPc | 6.75 | dB | |||
| VMA Loss | L | 4.4 | dB | |||
| VMA Loss to Crosstalk Ratio | VCR | 32.5 | dB | |||
The connector is compatible with the SFF-8436 specification.
Mechanical Specifications
Product show:
Testing Show:
Ordering informations:
| Length (m) | Cable AWG |
| 1 | 30 |
| 2 | 30 |
| 3 | 30/24 |
| 4 | 24 |
| 5 | 24 |
40G QSFP+ to QSFP+ Passive Direct Attach Copper (DAC) Twinax Cables 0.5m-5m for data center
Inquiry Cart
0