

Add to Cart
High Gain 27dBm Triband Mobile Signal Booster with AGC/ALC
Triband GSM/DCS/WCDMA 900/1800/2100MHz Mobile Signal Repeater
Description:
Indoor Tri Band Signal Repeater (Signal Booster) series is an ideal
solution for three wireless system in small/medium businesses and
home users looking to enhance indoor wireless connectivity. It is
connected via coaxial cable to Donor Antenna and Service Antenna,
Donor Antenna is placed outside the building where it has easy
access to BTS signal, and the Service Antenna is placed in the
building where it can extend radio coverage to the blind area. And
Automatic Gain Control (AGC) to avoid the Booster from over
saturation, therefore maintaining a high voice quality and avoid
adding interference to network. With good looking & super
compact design also make it attractive. Besides, it is easy
installation feature is also for individual customers to install
the booster by themselves, and it does not need much professional
knowledge and instrument.
The signal booster improves mobile signals with no negative impact
on human health.
Triband GSM/DCS/WCDMA 900/1800/2100MHz Mobile Signal Repeater Features:
1. Cost effective solution for weak signal zones, reduce drop/off
calls.
2. Compact size, low power consumption, easy installation, great
cover.
Expansion and extending of the signal of base station.
Optimization of the quality of the signal and source
3. Cover about 1000~5000m² without block or obstruct.
4. High linear design, ALC function design, low interference to
BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
Specification:
Frequency Range | Uplink | Downlink | |||
GSM 900MHz + DCS 1800MHz +WCDMA 2100MHz (GSM + Band 3 + Band 1) | 890-915/1710-1785/1920-1980MHz | 935-960/1805-1880/2110-2170MHz | |||
Max. Gain | 75dB±2dB | 80dB±2dB | |||
Max. Output Power | 24dBm±2dBm | 27dBm±2dBm | |||
Band width | Wide Band(Selective Band Available for OEM) | ||||
Manual Gain Control | 31dB / 1dB Step | ||||
Automatic Gain Control | >30dB | ||||
Ripple in Band | 8dB | ||||
Noise Figure | ≤ 6dB | ||||
VSWR | ≤ 2.0 | ||||
Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
1~12.75GHz | ≤ -30dBm | ||||
Time Delay | ≤ 1.5 μs | ||||
Frequency stability | ≤ 0.01ppm | ||||
MTBF | > 50000 hours | ||||
Impedance | 50 ohm | ||||
Power Supply | AC 90-264V,DC 10V/6A | ||||
Power LED | Power indicator | ||||
Alarm LED | Red | Self oscillation or Strong input signal | |||
Green | Normal | ||||
Mechanical Specification | |||||
RF Connector | N-Female | ||||
Switch | Power Switch | ||||
Cooling | Heatsink Convection cooling | ||||
Humidity | < 90% | ||||
Operating Temperature | -10°C ~ +55°C | ||||
Environment Conditions | IP40 | ||||
Installation Type | Wall Installation | ||||
Size |