

Add to Cart
Feature:
*Diameter:12mm/ 18mm, Standard body:62mm;
*DC 3-wire or 4-wire (12-24VDC+/-10%)
*PNP NO NC or NPN NO NC
*Detection distance:10cm(diffuse type), 40cm(diffuse type),
2m(retro-reflective), 5m(through-beam), 10m(through-beam).
*With 360 degree view Red indicator.
*Circuit Protection: polarity reverse and
*Protection Grade: IP66
*90 degree connecting and direct connecting are available.
*Connection Method:Pre-wired 2m cable, pre-wired 150mm cable and M8
connector
Specifications
NPN NO.NC | DR18RI-S40NC R2M | DR18MR-S200NC R2M; | DR18TI-S500NC R2M |
PNPNO.NC | DR18RI-S40PC R2M | DR18MR-S200PC R2M | DR18TI-S500PC R2M |
Detection Type | Diffuse | retro-reflective; | Through-beam |
Standard Detection; Object; | 10cm*10cm(White Paper) | ||
Detection Distance | 40cm | 2m | 5m |
Light Source | 850nm Infrared modulated light | ||
Operating Voltage | 12-24 VDC+/-10% | ||
Response Time | 0.3ms Max. | ||
Current Consumption | 15mA Max. | ||
Load current | 100mA Max at 24 VDC | ||
Insulation Resistance | 20M Ohm Min. at 500 VDC | ||
Dielectric strength | 60 seconds at 1000VAC 60HZ; | ||
Protection Degree | IP66 | ||
Operating Temperature | -10℃-50℃;(No Icing) | ||
Reverse Polarity Protection | Yes | ||
Short Circuit Protection | Yes | ||
Material | ABS | ||
Wire Method | dia4*2M/-3wires | ||
Weight | 107g |
12Vdc 18mm Diffuse Reflection Through-beam Photoelectric Sensor Switch