Automatic Aluminum Slitter Machine Coil Thickness 0.8-4.0mm Ф220 Mm Knife Pivot Diameter
Brand Name:RISHBIN
Certification:CE
Model Number:RS0.8-4.0
Minimum Order Quantity:1 PCS
Payment Terms:L/C, T/T, Western Union
Product Name:Aluminum Slitter Machine
Contact Now
Add to Cart
Verified Supplier
Location:
Wuxi Jiangsu China
Address:
No. 10, Jingshi Rd, Wuxi, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
RS0.8-4.0 Light Gauge Aluminum Slitter Machine Coil Thickness
0.8-4.0mm Accuracy ±0.25mm
Aluminum Slitter Machine Working procedure
In the beginning, the coil is loaded on the coil car by crane and
brought to the uncoiler by operating the coil car. Coil car
centralizes the coil with the uncoiler mandrel and the coil is
mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates
the coil. Peeler breaks the straps and brings the pre end upto
Pinch roll. The Pinch roll drives the coil end upto the slitter.
Then its drive is disconnected. Slitter moves the slitted strips
further. Slitted strips are threaded through loop table and drag
tensioner into the recoiler drum. Recoiler winds one turn on loose
coil.
Then drag tensioner and loop are put into operation. Slitter and
recoiler run simultaneously in synchronization. As the coil build
up, the recoiler rpm correspondingly goes down to keep desired
constant line speed. This process goes on until the end of coil on
uncoiler. The slitted coil is pushed on the exit coil car through a
pusher plate operated by hydraulic cylinder. The side slitted scrap
is wound on the scrap winder units provided on both sides of the
slitter.
Aluminum Slitter Machine Brief Introduction
Light Gauge Steel Slitting Line have strong power and versatility to be able to process heavier materials. We also have a continuous thickness measuring system to provide a greater strip quality. The design and the manufacture of slitting lines meet high standard of quality according to the market demand
When you are running prepaint, galvanized, or hot roll material, RISHBIN produces a complete line of Coil Processing Equipment that offers practical solutions to meet today’s most demanding requirements.
Our Cut-To-Length / Blanking Lines are packed with useful timesaving features that really make a difference. We offer a wide variety of options that allow you to custom configure a line to meet your specific requirements.
To help you achieve your own production capacity target, RISHBIN
Slitter supplies many options, such as high-speed slitting, medium
speed slitting, sheet metal slitter machine, etc. All slitting line
machines are easy to operate. They are very reliable, steady
performers for both short and long terms running productions.
- The thickness can range from the thinnest down to 0,10 mm, to the thickest up to 3 mm
- Strip Width, from the narrowest 400 mm to the widest 2200 mm
- Coils Weight, up to 30 tons
- Line Speed, up to 300 m/min.
- Operator Safety.
- Highest Production Outcome
- Ease of Operation and Maintenance
Aluminum Slitter Machine Parameter
| Model No. | RS0.2-1.8 | RS0.3-3.0 | RS0.8-4.0 |
| Coil Material | CR Coils , HR Coils, S.S Steel Coils, GI Coils ,AL Coils, Copper Coils Picking Oil Coils | ||
| Coil Thickness | 0.2～1.8mm | 0.3～3.0mm | 0.8～4.0mm |
| Line Speed | 0～150/300m/min | 0～150/300m/min | 0-120/200m/min |
| Coil Weight | ≤10T(15T) | ≤20T(25T) | ≤25T(30T) |
| Coil I.D | φ508mm | φ508mm | φ508,φ610,φ760mm |
| Coil O.D | ≤φ1600mm | ≤φ2000mm | ≤φ2000mm |
| Strip Width | ≥15mm | ≥25mm | ≥25mm |
| Number of Strip | 5～15 | 8～20 | 5～15 |
| Slitting Accuracy | ±0.1mm | ±0.15mm | ±0.25mm |
| Blade shaft | Ф220mm | Ф240mm | Ф240mm |
| Electrical Control System | PLC Automatic control | PLC Automatic control | PLC Automatic control |
Automatic Aluminum Slitter Machine Coil Thickness 0.8-4.0mm Ф220 Mm Knife Pivot Diameter
Inquiry Cart
0