Heavy Gauge Slitting Line Machine 6-20mm 0-60m/Min PLC Automatic Control
Brand Name:RISHBIN
Certification:CE
Model Number:RS 4.0-16.0
Minimum Order Quantity:1 PCS
Payment Terms:L/C, T/T, Western Union
Place of Origin:Wuxi， China
Contact Now
Add to Cart
Verified Supplier
Location:
Wuxi Jiangsu China
Address:
No. 10, Jingshi Rd, Wuxi, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
RS 4.0-16.0 Heavy Gauge Slitting Lines Coil Roll thickness 6-20mm
0-60m/min
Metal Slitting Line Benifits
Heavy Gauge Slitting Lines are used for different sizes coils with
different thickness to be slit into special strips as requirements
.These products are for roll mill ,HF tube mill,cold forming
machines ,punching &press machines etc. Raw material is CR
material ,HR material , silicon steel, S.S steel ,Color steel, AL
,PPGI
- High availability
- Low operating costs
- High automation level to reduce non-productive times
- Flexibility from customer-specific arrangement and design
- Separate coil preparation system
- Tool change turnstile to minimize the program change times
- Edge scrap shear with hydraulically operated knife heads in tapered polygonal design for rapid knife head change
- High quality of the final product
RISHBIN provides decades of experience from numerous lines supplied to well-known customers worldwide. Many years of experience in the design, manufacture and commissioning sectors demonstrate our expertise in supplying customer-oriented solutions.
To help you achieve your own production capacity target, RISHBIN
Slitter supplies many options, such as high speed slitting, medium
speed slitting, etc. All slitters are easy to operate. They are
very reliable, steady performers for both short and long terms
running productions.
The thickness can range from the thinnest down to 3.0 mm, to the
thickest up to 20 mm
Strip Width, from the narrowest 400 mm to the widest 2500 mm
Coils Weight, up to 35 tons
Line Speed, up to 60 m/min.
Metal Slitting Line Working procedure:
In the beginning, the coil is loaded on the coil car by crane and
brought to the uncoiler by operating the coil car. Coil car
centralizes the coil with the uncoiler mandrel and the coil is
mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates
the coil. Peeler breaks the straps and brings the pre end upto
Pinch roll. The Pinch roll drives the coil end upto the slitter.
Then its drive is disconnected. Slitter moves the slitted strips
further. Slitted strips are threaded through loop table and drag
tensioner into the recoiler drum. Recoiler winds one turn on loose
coil.
Then drag tensioner and loop are put into operation. Slitter and
recoiler run simultaneously in synchronization. As the coil build
up, the recoiler rpm correspondingly goes down to keep desired
constant line speed. This process goes on until the end of coil on
uncoiler. The slitted coil is pushed on the exit coil car through a
pusher plate operated by hydraulic cylinder. The side slitted scrap
is wound on the scrap winder units provided on both sides of the
slitter.
Metal Slitting Line Specification:
| Model No. | RS 3.0-12.0 | RS 4.0-16.0 | RS 6.0-20.0 | |
| Coil Material | CR Coils , HR Coils, S.S Steel Coils, GI Coils, AL Coils, Copper Coils Picking Oil Coils | |||
| Coil Thickness | 3.0～12.0mm | 4.0～16.0mm | 6.0～20.0mm | |
| Line Speed | 0～60m/min | 0～50m/min | 0-50m/min | |
| Coil Weight | ≤30T(35T) | ≤30T(35T) | ≤30T(35T) | |
| Coil I.D | φ508,φ610,φ760mm | φ508,φ610,φ760mm | φ508,φ610,φ760mm | |
| Coil O.D | ≤φ2200mm | ≤φ2500mm | ≤φ2500mm | |
| Strip Width | ≥100mm | ≥100mm | ≥100mm | |
| Number of Strip | 5～20 | ≤5 | ≤5 | |
| Slitting Accuracy | ±1.0mm | ±1.0mm | ±1.0mm | |
| Blade shaft | Ф320 | Ф340mm | Ф360mm | |
| Electrical Control System | PLC Automatic control | PLC Automatic control | PLC Automatic control | |
| COIL/ROLL DETAILS | Material | HR, CR, SS, GI, PPGI, |
| Tensile Strength | δb≤550Mpa,δS≤260Mpa | |
| Coil/Roll thickness | 6-20mm | |
| Steel Coil/Roll width | 600-2500(Max) | |
| Coil/Roll I.D | Φ500-760 mm | |
| Coil/Roll O.D | Φ2500mm(Max) | |
| Steel Coil/Roll Weight | 35T(Max) | |
Slitter parameters | knife pivot diameter | Ф360 mm |
| Knife pivot material | 40Cr | |
| Blades specification | Φ360mmXφ360mmX20mm | |
| Blade material | 6CrW2Si | |
| Max slit quantity | 4 pcs (16mm) 8 pcs(8mm)(Customized) | |
| Width precision | ≤±0.05mm/2M | |
Other parameters | Power | 380V/50Hz/3Ph(Customized) |
| Line speed | 0-60m/min | |
| Capacity | 450 KW | |
| Whole line Dimension | 45m(L)X10m(W) | |
| Line direction | From right to left(Face to machine) | |
| Machine color | Blue |
Heavy Gauge Slitting Line Machine 6-20mm 0-60m/Min PLC Automatic Control
Inquiry Cart
0