±0.3mm Steel Slitting Equipment Strip Width ≥70mm Sheet Steel Slitting Machine
Brand Name:RISHBIN
Certification:CE
Model Number:RS 3.0-10.0
Minimum Order Quantity:1 PCS
Payment Terms:L/C, T/T, Western Union
Place of Origin:Wuxi， China
Contact Now
Add to Cart
Verified Supplier
Location:
Wuxi Jiangsu China
Address:
No. 10, Jingshi Rd, Wuxi, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
RS 3.0-10.0 Steel Slitting Line Medium Gauge 0-30/50m/Min PLC
Automatic Control
Medium Gauge Slitting Lines Characteristic
These knives partially penetrate the coil stock causing a crack or
fracture on both sides of the stock, separating the mults from one
another. Rubber stripper rings are also employed depending on the
material thickness to attain a good edge so no burr is present that
will hinder downstream operations. As the material is slit, the far
outside edges of the coil have edge trim.
This edge trim is taken up on a scrap winder. If the material to be slit is extremely thin, a looping pit can be used to take up the varying thickness of the mults as the edge cuts are generally thinner than the center cuts. The thin the material, the longer the lineal footage in the master coil.
The looping pit will take up the additional volume prior to entering the tension stand. The tension stand is located prior to the recoiler. A tensioning device is needed because the master coil is crowned or larger in diameter in the center of its width than at the edges.
- Fully automatic strip threading systems
- Special braking units for strips with high surface finish
- Non-contact braking strips for the aluminum industry
- Automatic knife change
- Knife arbors with quadruple radial precision bearings
- Automatic clamping and unclamping of the cutting tools on the knife arbor
- Automatic strip strand transfer systems
Medium Gauge Slitting Lines Specification
| Model No. | RS 1.0-6.0 | RS 2.0-8.0 | RS 3.0-10.0 | |
| Coil Material | CR Coils , HR Coils, S.S Steel Coils, GI Coils , AL Coils, Copper Coils Picking Oil Coils | |||
| Coil Thickness | 1.0～6.0mm | 2.0～8.0mm | 3.0～10.0mm | |
| Line Speed | 0～110m/min | 0～50/80m/min | 0-30/50m/min | |
| Coil Weight | ≤30T(35T) | ≤30T(35T) | ≤30T(35T) | |
| Coil I.D | Φ508,φ610,φ760mm | Φ508,φ610,φ760mm | φ508,φ610,φ760mm | |
| Coil O.D | ≤φ2200mm | ≤φ2200mm | ≤φ2200mm | |
| Strip Width | ≥30mm | ≥50mm | ≥70mm | |
| Number of Strip | 4～15 | 5～20 | 5～18 | |
| Slitting Accuracy | ±0.3mm | ±0.3mm | ±0.3mm | |
| Blade shaft | Ф260mm | Ф280mm | Ф300mm | |
| Electrical Control System | PLC Automatic control | PLC Automatic control | PLC Automatic control | |
Customized slitting lines for every different kind of metal strip and in all required dimensions would be available.
Medium Gauge Slitting Lines Main Technical Specifications
| COIL/ROLL DETAILS | Material | HR, CR, SS, GI, PPGI, Copper |
| Tensile Strength | δb≤600Mpa,δS≤360Mpa | |
| Coil/Roll thickness | 1-10mm | |
| Steel Coil/Roll width | 500-2200(Max) | |
| Coil/Roll I.D | Φ500-760 mm | |
| Coil/Roll O.D | Φ2000mm(Max) | |
| Steel Coil/Roll Weight | 35T(Max) | |
| knife pivot diameter | Ф220 mm |
| Knife pivot material | 40Cr | |
| Blades specification | Φ220mmXφ360mmX20mm | |
| Blade material | 6CrW2Si | |
| Max slit quantity | 4 pcs (4mm) 20 pcs(1mm) | |
| Width precision | ≤±0.05mm | |
| Power | 380V/50Hz/3Ph(Customized) |
| Line speed | 0-80m/min | |
| Capacity | 360 KW | |
| Whole line Dimension | 45m(L)X10m(W) | |
| Line direction | From right to left(Face to machine) | |
| Machine color | Blue |
±0.3mm Steel Slitting Equipment Strip Width ≥70mm Sheet Steel Slitting Machine
Inquiry Cart
0