Motorized Metal Steel Automatic Slitting Machine For Coil Roll Operator Safety
Brand Name:RISHBIN
Certification:CE
Model Number:RS0.3-3.0
Minimum Order Quantity:1 PCS
Payment Terms:L/C, T/T, Western Union
Place of Origin:Wuxi， China
Contact Now
Add to Cart
Verified Supplier
Location:
Wuxi Jiangsu China
Address:
No. 10, Jingshi Rd, Wuxi, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Light Gauge Steel Coil Cutting Machine 220mm Blade Shaft Dual Head
RS 0.3-3.0
Light Gauge Steel Slitting Line introduction
The process begins with loading a coil of steel or master coil onto the uncoiler. The uncoiler can be a dual cone type for heavy gauges or a single end expanding mandrel type for heavy or light gauges. The coil can be loaded into the cones via a pusher type ramp or via a turnstyle and coil car that threads the mandrel of the single end into the inner diameter of the master coil.
The hold down presses onto the outside diameter of the master coil and the bands are cut on the master coil. The coil is rotated off the cones or mandrel and peeled to allow the head of the coil to enter edge guides prior to the flattener and leveler (if flatness is critical in downstream operations). Next, The slitter, which consists of two parallel arbors mounted with rotary cutting knives.
- The thickness can range from the thinnest down to 0,10 mm, to the thickest up to 3 mm
- Strip Width, from the narrowest 400 mm to the widest 2200 mm
- Coils Weight, up to 30 tons
- Line Speed, up to 300 m/min.
- Operator Safety.
- Highest Production Outcome
- Ease of Operation and Maintenance
Light Gauge Slitting Lines Working procedure
In the beginning, the coil is loaded on the coil car by crane and
brought to the uncoiler by operating the coil car. Coil car
centralizes the coil with the uncoiler mandrel and the coil is
mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates
the coil. Peeler breaks the straps and brings the pre end upto
Pinch roll. The Pinch roll drives the coil end upto the slitter.
Then its drive is disconnected. Slitter moves the slitted strips
further. Slitted strips are threaded through loop table and drag
tensioner into the recoiler drum. Recoiler winds one turn on loose
coil.
Then drag tensioner and loop are put into operation. Slitter and
recoiler run simultaneously in synchronization. As the coil build
up, the recoiler rpm correspondingly goes down to keep desired
constant line speed. This process goes on until the end of coil on
uncoiler. The slitted coil is pushed on the exit coil car through a
pusher plate operated by hydraulic cylinder. The side slitted scrap
is wound on the scrap winder units provided on both sides of the
slitter.
| Model No. | RS0.2-1.8 | RS0.3-3.0 | RS0.8-4.0 |
| Coil Material | CR Coils , HR Coils, S.S Steel Coils, GI Coils ,AL Coils, Copper Coils Picking Oil Coils | ||
| Coil Thickness | 0.2～1.8mm | 0.3～3.0mm | 0.8～4.0mm |
| Line Speed | 0～150/300m/min | 0～150/300m/min | 0-120/200m/min |
| Coil Weight | ≤10T(15T) | ≤20T(25T) | ≤25T(30T) |
| Coil I.D | φ508mm | φ508mm | φ508,φ610,φ760mm |
| Coil O.D | ≤φ1600mm | ≤φ2000mm | ≤φ2000mm |
| Strip Width | ≥15mm | ≥25mm | ≥25mm |
| Number of Strip | 5～15 | 8～20 | 5～15 |
| Slitting Accuracy | ±0.1mm | ±0.15mm | ±0.25mm |
| Blade shaft | Ф220mm | Ф240mm | Ф240mm |
| Electrical Control System | PLC Automatic control | PLC Automatic control | PLC Automatic control |
Motorized Metal Steel Automatic Slitting Machine For Coil Roll Operator Safety
Inquiry Cart
0