Ship Hauling Boat Salvage Airbags Safety Heavy Duty High Tensile Strength

Marine Salvage Inflatable Rubber Airbags 3.0 x 15 m Floating Pontoon

Marine salvage airbags are the toughest buoyancy units. It can be used as salvage pontoon for the supporting docks, and other floating structures. Also can be used to salvage thewreck, rescue the floating bridge and dock constructionS, buoyancy loading from deep water. It really come into own when marine salvage airbags employed in heavy duty salvage work under severe environment.

1) Tie winch wire rope to the ship hull

2) Choose the bow at the bottom of the better position to fill in one or more airbags, when lifting to a certain height, will be the first to reach the ship under the winch tows. Barge bottom flat type, such as air bags and bottom contact area large, if the ship hull weight was small, as long as there is difficulties, from the first feeding can be from one side to the other string into a airbag.When the hull weight is bigger, according to certain spacing increase 1 to 2 or more air bags, until lift up first. First a "v" shaped powerboat, often because of the air bag and the bottom contact area is too small lifting force is not enough, would require air bag back, sometimes want to back a quarter of the captain to lift up the bow.

3) Start the winch, the ship started to move, one by one according to the requirements of gasbag placed spacing feeding airbags, always pull the boat to the berth.

4) Lifting vessels in conjunction with the lifting gas together, playing hard block, good ship, withdraw airbags.

Specification

We are a professional manufacturer of multi-purpose marine equipment including ship launching and landing air bag, pneumatic rubber fenders, EVA foam filled fenders, marine buoys in deep and shallow seas etc. Through many years’ development and accumulation, we have developed to a new high-tech enterprise with an integration of scientific research and design, product R&D,sales and technical service.

Initially established as Qingdao Luhang Marine Airbag Factory in 1988 and changed to Qingdao Luhang Marine Airbags and Fenders Co.,Ltd in 2011, Qingdao Luhang had been devoted itself to developing and manufacturing marine airbags and marine fenders for more than 2 decades.

The factory area is 56,000m² with building area of 21,000m². The company has registered capital of USD 3 million and fixed asset of USD1.2 billion. We have a full line of production equipment: rubber mixing machine, rubber roller machine, the China biggest vulcanization tanks, the biggest Press Inspection Machine, EVA foam processing machine, Foam shaping machines and SPUA spraying machine.

Through these years' development, we have full range of marine airbags and marine fenders:

Ship Launching Airbags for ship launching and docking in shipyards

Marine Salvage Airbags for salvaging sinked vessels or refloating objects from under water

Other Airbags for special usage

Pneumatic Rubber Marine Fenders for ships and docks berthing

Foam Filled Marine Fenders for ship and docks berthing

Fixed Dock Rubber Fenders for docks and wharfs

Marine Buoys

From the begginning we have been focusing on technological innovation. With a team of experienced technicans and engineers, we have developed some high tech marine products and got some petents. We have been approved as a supplier of Navy products.

Quality is our life line. We provide service of “three guarantees” (returning, repairing and replacing) on all our products in case of any defects due to the problems of material,manufacturing, performance under conditions of normal operation and maintenance.