Wireless Chargeable Oled Screen Endodontic Equipment Woodpecker Endo

Wireless Oled Screen Endodontic Equipment Woodpecker Endo Smart Endo Motor

Features:

a) Adopt real-time feedback technology and dynamic torque control, effectively preventing needle breakage.

b) Wireless handpiece enables more convenient operation.

c) Wireless charging avoids poor contact problem of traditional contact charging. d) Storage of 9 user-defined modes allows invocation at any time. Under each mode, Continuous Rotation Mode, Reciprocating Motion Mode, and Reverse Rotation Mode are for options

Installation and removal of contra-angleInstallation

Align the positioning pin of contra-angle with the positioning hole
of handpiece, horizontally pushing the contra-angle. A click
sound
indicates that it is well installed. By aligning those three pins on contra-
angle with those six holes on handpiece, the contra-angle can be
installed in different angle. (As shown below)
2.3.2 Removal
Pull out the contra- angle horizontally when the motor handpiece does
not start.

Warnings
a) Before plugging in or pulling out contra-angle, please first stop the
handpiece motor.
b) After installation, please check and confirm that the contra-angle has
been well installed.

Primary technical specifications

1 Battery Lithium battery in handpiece: 3.6V /750mAh

2 Power adapter Input: ~100V-240V 50Hz/60Hz 0.4A Max 5 Output: DC5V/1A

3 Torque: 0.6Ncm-5.0Ncm(6mNm ~ 50mNm)

4 Rotate speed: 100rpm~1000rpm

Environment parameters

1.Environment temperature: +5℃ ~ +40℃

2 Relative humidity: 30% ~ 75%

3 Atmospheric pressure: 70kPa ~ 106kPa

Customized program handover setting
In Standby interface, shortly press adjusting key“+”and adjusting key
66_”
to realize handovers among different customized programs. Long
press adjusting key“+”and adjusting key“”to realize cyclic handover.

Contra-angle calibration setting
After replacement of contra-angle, the contra-angle shall be calibrated
before use. In Standby Interface, first long press setting key“S”
and
then long press“”for 2s to enter Calibration Interface of contra-angle.
After 15s's countdown, the interface of successful calibration will

Troubleshooting

Package:

We also supply many other related products:

About Us:

Web: www.zzlinker.com

Email: sale@zzlinker.com

Mobile/WhatsApp/Wechat: 0086 18860361012

Zhengzhou Linker Medical Equipment Co., Ltd. is located in Zhengzhou, central area of China, a traditional commerce city with rich history and culture.

Since 2007, our company has been focusing on dental products export, including dental equipments and materials, dental cultural products and electrical products and so on. We believe that quality of products and service are the lifeline of enterprise. Our company has strict control on products quality, partners’ selection. All of our products are popular in Europe, America, Middle East, Asia Area more than 50 different countries and areas. While developing long and lasting cooperation with many big companies in these areas, we are seeking for more new partners from all over the world. If you need any dental products, don’t forget to give us enquiry, we will discuss further on our mutual beneficial cooperation.

Our main products are dental unit, air compressor, autoclave, X ray unit, ultrasonic scaler, light cure, air turbine handpiece, intra-oral camera and apex locator. Meanwhile we can supply branded products from Dentsply, Mani, Saeshin, Saeyang, NSK, Woodpecker, Vita, Meta, Coxo, Greatstar, BEING, SINOL, RUNYES, GAPADENT, SUPLINE, SMIC and so on.

“For your better clinic, for all better teeth, for most beautiful smile” is our goal of developing. Welcome to visit website or company to know more. Thanks very much.