Stainless steel 316L Automatic change-over switching station for high flow rate and for the connection of 2 x 2 cylinder
Brand Name:AFK
Certification:CE
Model Number:WL300
Minimum Order Quantity:>=1 Sets
Place of Origin:Guangdong, China (Mainland)
Supply Ability:10000 Set/Sets per Week
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
Foor 2, 4th Buidling, A Zone, Xinhe Xinxing Industrial 3th Zone, Fuhai Avenue, Baoan, Guangdong, China.
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
WL300 Series Semi-automatic Changeover Device
It is suitable for high pressure gas cylinders and pressure relief
gas supply on both sides,
through the automatic changeover to realize continuous gas supply,
with the function of purging.
The maximum input pressure of 20.7Mpa (3000psi), corrosion, clean
workshop assembly test, suitable for laboratory, high purity gas
such as gas analysis.
Product Specifications
1) Max. Inlet Pressure: 3000, 2200Psi
2) Max. Outlet Pressure: 25, 50, 100, 150, 0~250Psi
3)Working Temperature: -40℃~74℃(-40℉~165℉)
4) Leakage rate: 2 x 10-8 atm.cc/sec He
5)Cv: 0.08
Design Features
1) Pressure regulator for special gas
2) Equipped relief pressure valve
3)Pressure regulator and pipe through the pressure test and leakage test
4)2" stainless steel pressure gauge, reading clearly
5) The knob of diaphragm valves with on/off logo.
Material List | |||
Body material | Stainless steel 316L | ||
Valve Seat | PU, PTFE, PCTFE | ||
Diaphragm | Stainless steel 316L | ||
Inlet connection | 1/4" NPT (F) | ||
Outlet connection | 1/4" NPT (F) | ||
High pressure outlet pressure flow curve
Ordering Information
Low pressure outlet pressure flow curve
| ORDERING INFORMATION | ||||||||
| WL3 | 1 | 1 | 1 | S | H | 1 | 1 | -N2 |
| Series | Function Options | Outlet Connection | Inlet Connection | Body Material | Input Pressure | Outlet Pressure | Gauge | Gas Option |
| WL300 Series Semi-automatic Changeover Device | 1.With emptying, purging distribution function | 1:1/4”NPT(F) | 1:1/4″Weldmg | S:stainless | H:3000psi | 1:25psi | 1:MPa | Blank: None |
| 2.Wrthout Emptying, purging distribution function | 2:1/4”Tube fitting | 2:1/4”NPT(M) | steel | M:2200psi | 2:50psi | 2:Bar/psi | N2:nitrogen | |
| 3.Emptying. purging distnbuUon+pressure sensor | 3:3/8”NPT(F) | 3:3/8”Melding | C:nickel plated | L:1000psi | 3:100psi | 3:psi/KPa | O2:oxygen | |
| 4.With pressure sensor | 4:3/8”Tube fitting | 4:3/8”NPT(M) | brass | O: Other | 4:150psi | 4:Other | H2:hydrogen | |
| 5:Other | 5:1/2”NPT(F) | 5:1/2”Melding | 5:250psi | C2H2:acetylene | ||||
| 6:1/2”Tube fitting | 6:1/2”NPT(M) | 6:Other | CH4:methane | |||||
| 7:Other | 7:1/4”Tube fitting | Ar:argon | ||||||
| 8:3/8″Tube fitting | He:helium | |||||||
| 9:1/2″Tube fitting | Air:air | |||||||
| 10:Other | ||||||||
FAQ
Q1. What products can you provide?
Re: High pressure regulator, cylinder gas regulator, ball valve, needle valve, compression fittings(connections).
Q2. Can you make the products based on our requests, such as connection, thread, pressure and so on?
Re: Yes, We have experienced techincal team and can design and produce the products according to your requirements. Take a pressure regualtor for example, we can set the range of pressure gauge according actual working pressure, if the regulator is connected to a gas cylinder, we can add an adaptor such as CGA320 or CGA580 to connect the regulator with the cylinder valve.
Q3. What about the quality and price?
Re: Quality is very good. Price is not low but pretty reasonable at this quality level.
Q4. Can you provide samples to test? For free?
Re: Of course, you can take several to test firstly. Your side shall bear the cost due to its high value.
Q5. Can you operate OEM orders?
Re: Yes, OEM is supported though we also have our own brand named AFK.
Q6. What payment methods for chose?
Re: For small order, 100% Paypal, Western Union and T/T in advance. For bulk purchase, 30%T/T, Western Union, L/C as deposit, and 70% balance paid before shipment.
Q7. How about the lead time?
Re: Usually, delivery time is 5-7 working days for sample, 10-15 working days for mass production.
Q8. How will you ship the goods?
Re: For small amount, international express is used mostly such as DHL, FedEx, UPS, TNT. For large amount, by air or by sea. Besides, you also can have your own forwarder pick up the goods and arrange the shipment.
Stainless steel 316L Automatic change-over switching station for high flow rate and for the connection of 2 x 2 cylinder
Inquiry Cart
0