Double Screw Extruder Side Feeder Machine With Hopper for Petrochemical Industry

CWJ132 Double Screw Extruder Side Feeder Machine With Hopper For Petrochemical Industry

Joiner employs segmented screws with a self-wiping profile to provide optimum feeding properties for a wide range of raw materials such as fillers, fiberglass, talcum powder, calcium carbonate and most inorganic materials.

1. Advantages of Joiner Extrusion Side Feeder

1. Independently develop and produce gearboxes.
a. All gearboxes are machined by gear grinding, the accuracy is up to six grades, and carburizing and hardening the tooth surface, thus ensuring that the noise of gearboxes is very low.
b. Gear casting is made of resin sand and machining center to ensure high precision.
c. The gearbox’s bearing is imported from Germany.
d. The gearbox has unique design, long life and low noise.
e. The gearbox and screw element are connected by spline sleeve, which is very convenient to disassemble

2. Barrel is made of wear resistant alloy steel and cooled by water channel.

3. Screw adopts modular screw, and the screw assembly can be adjusted according to different feeding materials to meet different feeding requirements.


2. Side feeders are used for the following reasons:

--reduction of wear costs in the melting section of the main screw and barrels
--More gentle processing of fillers
--Increase in throughput
--Increase in quality through the enough fixing
--Lower the cost

3. Side Feeder for:
- Berstorff: ZE -KEYA, LANTAI
- Leistritz: ZSE -MICRO - Theysohn: TSK
- Maris: TM-W - APV:MP65
- JSW: TEX - SM:TEK-HS
- Feddem: FED-MTS - Fessia Macross: NRII
- TOSHIBA: TEM - Labtech: LTE
-USEON:TDS - SHIZHOU:MTE
4. All models we produce


5. Our packing: We use custom wooden cases for packing


7. Products photos:



Contact Joiner for more: jessica.zhang@jiangningjx.com

Joiner Machinery Co.,Ltd is a professional enterprise of spare parts for twin screw extruder: Barrel & Screw Element & Shaft & Side Feeder.

It occupies 15600 square meters with over 100 staffs and more than140 sets of advanced processing equipments in our plants.Such as the CNC thread grinding machine, the CNC screw milling,the CNC lathe,the CNC surface grinder,the CNC cylindrical grinder,the CNC sawing machine,the automatic deep hole grinding machine,the CNC lathe,the CNC surface grinder,the CNC cylindrical grinder,the CNC sawing machine,the laser marking machine,the vacuum quenching furnace,the vacuum tempering furnace and so on.Ultimately,We become one-stop manufacturer for all services and thereby ensure the good quality through the internal control.There are also some advanced testing equipments,such as the three coordinate measuring system,metallographic analyzer,the Tayer roughness meter,The Janpanese Mitutuyo height gauge,the CMM,the Rockwell hardness tester,Vickers hardness tester ,the three coordinate measuring system and some other advanced testing equipments.Which ensure the products 100% controllable.we have over 20 years of experience in supply and refurbishment for wear parts.

Supplied sample mapping and processing for overseas

-APV -KOBE -OMC

-Buhler -KraussMaffei -Theysohn

-Buss -Berstorff -Toshiba

-Clextral -Labtech -JSW

-Leistritz -Maris -Keya

-others

Inspection of screw element Barrels

Joiner will throughly inspect all parts of wear,Cracks,Imperfections,Straightness,and Concentricity.Joiner will rapair broken barrals,and other componets.Inspections need to be performed to determine the severity of damage and if reparation is an option.All conclusion are documented in detailed reports with respective Recommendations.

As Lao Ti said" a journey of a thousand miles begins with a single step"

Joiner always adhere the saying and devete to the field of extrusion for 20 years.We believe in the continuous improvement of pursuit of excellence to achieve win-win cooperation with our customers.

Welcome to visit our company,We believe that if you have visited our factory,you will choose Joiner Machinery.