Cast Steel Soft Seated Ball Valve , API 6D Side Entry Ball Valve 2 Inch - 36 Inch

Cast Steel Trunnion Soft Seated Ball Valve Api6d Side Entry Split Body Flanged Q47F

Quick Details

1. Product: Cast Steel Trunnion Ball Valve Soft Seated

2. Size Range: 2” - 36"

3. Pressure Ratings: ANSI Class150, Class300, Class600, Class900

4. Body materials: Cast Steel WCB, LCB, CF8, CF8M, CF3, CF3M etc

5. Trim: 13CR, 304SS, 316SS, Duplex stainless steel;

6. Bore Type: Full Bore and Reduced Bore

7. Actuator: Lever, Worm Gear

8. Fire Safe Design, Anti-Static, Nace Mr0175

Features

Trunnion ball valves are mainly used in the industries of natural gas, oil products, chemicals, metallurgy, urban construction, environmental protection, foodstuff etc. Among them, the sulfur-resisting series products are applicable for seriously corrosive natural gas pipeline containing hydrogen sulphide mediums and impurities.

1. Distinctive Seating Structure

According to the extent of pressure, medium properties and sealing requirements, Trunnion ball valves may be made to front seal structure, back seal structure, or front-back dual seal structure.

2. Self-relieving Structure

In case of abnormal rise of pressure at middle cavity, ball valve of single seal structure is provided with self-relieving function, while ball valve of dual seal structure uses the auxiliary pressure relief device on valve body to carry out pressure relief.

3. First Aid of Seal

The valve is designed with an auxiliary seating emergency seal system, as shown in the figure. In case of soft seal damaged, or failure of seal in an emergency circumstances, emergency seal may be effected by injecting in sealant through auxiliary sealing system. If needed, emergency seal assembly can be used to rinse and lubricate the seating area.
Plus, valve stem can also be designed with an auxiliary emergency sealing system.

4. Fire Protection Strcture

If requested by working conditions and users, ball valve may be designed to fireproof. The fireproofing design of ball valve is to the standards of API607 and JB/T6899. In case of soft seal ring burnt in fire, the fire protection structure of ball valve functions to prevent mediums from mass leakage, thus to avoid fire spreading.

5. Antistatic Structure

When operating the valve, the friction between the ball and seat will produce electrostatic charge that can be accumulated on the ball. To prevent static spark, an antistatic device is placed on the valve to derive the electric charge accumulated on the ball.

6. Locking Device

To prevent misoperation and the unexpected open or close caused by the unpredicted circuit vibration, a locking device is designed at the fully opened and closed positions of hand operated ball valve. This design is proven especially good and effective in the production line of inflammable mediums of petroleum and chemicals, or when valves are mounted outdoors.

Description:

1. Standards

Design and manufacture: API6D

Inspection and Test: API 598,API 6D

End flange dimension: ASME B16.5

BW ends dimension: ASME B16.25

Face to face or End to ends: ASME B16.10

Pressure-temperature rating: ASME B16.34

2. Main Parts and Materials for the Trunnnion Soft Seated Ball Valve

Tengs Valve - China High Quality Industrial Valve and Strainer Supplier, With More than 20 Years' Manufacturing and Exporting Experience.

Our Leading Products are Cast Steel / Forged Steel Industrial Valves and Strainers, Such as Gate Valve, Check Valve, Globe Valve, Ball Valve, Butterfly Valve, Y Type Strainer, Basket Strainer, T Type Strainer and Temporary Strainer.

All the Industrial Valves and Strainers are According to the International Standards Api, Ansi, Din, and GB etc, and the Materials Include Carbon Steel, Alloy Steel and Stainless Steel: WCB, WCC, LCB, LCC, WC6, WC9, C5, C12, CF8, CF8M, CF3, CF3M, 4A, 5A, C95800, A105, LF2, F11, SS304, SS304L, SS316, SS316L, F51 and F53 etc. Sizes Range From 1/2" to 48" (Dn15 - Dn1200), Pressure Rating From Ansi Class150LB to 2500LB (Pn10 - Pn100).

Modern Workshop, Standardized Production, We Implement Strict Quality Inspection System, In-House Inspection or Third-Party Inspection to Make Sure All the Products are Qualified Before Delivery.

Our Industrial Valve and Strainer are Widely Used in Oil, Gas, Petrochemical, Water Treatment and Energy Industries. And exported to Many Countries and Regions.

We Provide OEM & Custom-made Service, Hope to Cooperate and Provide You the Quality Products and Service.