

Add to Cart
Quckly installed boiler | |||||
boiler model | Unit | DZL1-0.7/1.0-AII | DZL2-0.7/1.0-AII | DZL4-0.7/1.25/1.6-AII | DZL6-1.25/1.6-AII |
capacity | ton/h | 1 | 2 | 4 | 6 |
rated pressure | Mpa | 0.7/1.0 | 0.7/1.0 | 0.7/1.25/1.6 | 1.25/1.6 |
rated steam temeperature | ℃ | 170/184 | 170/184 | 184/193/204 | 193/204 |
feed water temperature | ℃ | 20 | 20 | 20 | 105 |
radiation area | ㎡ | 4.21 | 6.43 | 10.55 | 16.95 |
convection area | ㎡ | 20.68 | 39.23 | 90.45 | 134.87 |
economizer area | ㎡ | 9.66 | 16.56 | 16.56 | 53.13 |
valid grate area | ㎡ | 1.852 | 3.15 | 5.18 | 8.395 |
applicable fuel | * | COAL | COAL | COAL | COAL |
exhaust gas temperature | ℃ | 152/160 | 152/161 | 163/163.8/169.5 | 163/169 |
design efficiency | % | 77.73/77.24 | 78.53/78.18 | 79.37/79.30/78.96 | 79.83/79.19 |
fuel consumption | kg/h | 170.74/172.93 | 341.71/343.63 | 673.22/676.27/682.11 | 866.39/877.51 |
max part size for delivery | mm | 5488*2254*2782 | 5694*2704*3324 | 6743*2954*3508 | 8244*2951*3704 |
Safe And Stable 1000-6000kg/h Wood Pellets Biomass Steam Boiler 10 bar pressure for Chemistry Factory
1. Introductions
Product details: The biomass steam boiler boiler produced by the company is a horizontal quick-install boiler with a natural circulation. It uses biomass energy as fuel and can be divided into biomass steam boilers, biomass hot water boilers, biomass hot blast stoves, biomass heat transfer oil furnaces, vertical biomass boilers, and horizontal biomass boilers.
2. Features:
1). The boiler completely realizes the purpose of low-temperature
combustion, and adopts the medium-temperature separation technology
to make the flue gas temperature of the whole circulating flow
field of the boiler lower than the ash melting point temperature of
the biomass fuel;
2). A good material circulation loop is established inside the
boiler, the fuel is fully mixed, the furnace temperature is
uniform, the fuel combustion efficiency is high, the fly ash has a
very low carbon content, and the air pollution is small;
3). A variety of technologies are used in the boiler design process
to effectively avoid boiler ash and coking, so that the boiler has
strong continuous operation capability;
4). In the boiler design process, the corrosion problem caused by
biomass fuel such as straw is well solved, which greatly prolongs
the service life of the equipment;
5). The boiler has good dynamic response capability, convenient
starting, fast load lifting rate; boiler combustion device has no
moving parts, and the maintenance cost is low;
3. Classification
Biomass boilers are roughly classified into two categories
according to their use:
1) one is a biomass thermal boiler and the other is a biomass electric boiler. The principle of the two is basically the same, both get energy through biomass fuel, the first one directly obtains heat energy
2) the second one converts heat energy into electric energy. Among the two boilers, thermal boilers are the most widely used and the most mature. According to the volume classification of biomass thermal boilers,
it can be divided into the following three forms:
The first type: small biomass thermal boiler. Such a boiler uses a
solidified or vaporized biomass fuel to provide thermal energy in
the form of hot water, which has the advantages of small size,
simple structure, and low price. The disadvantage is that the
energy loss is large, the fuel consumption is large, the heat
energy supply is low, and the user with large heat demand cannot be
satisfied. The boiler can be used as a heating and hot water supply
device for the home.
The second type: medium-sized biomass thermal boiler. Such boilers
mainly use solidified biomass fuels to provide hot water or steam,
and most of the industrial use of this type of boiler. Its
advantages are that the technology is relatively mature, the energy
loss is small, and the heat energy supply capability is strong; the
disadvantage is that fuel coking will occur at the bottom of some
boilers, which will greatly reduce the combustion efficiency of the
boiler.
The third type: large biomass thermal energy boiler. This type of
emphasis emphasizes a centralized management and centralized
control of thermal energy engineering. The boiler is one of the
devices to ensure the normal operation of the entire biomass
thermal energy project. Therefore, it requires high requirements
for fuel, combustion technology and supporting technology.
4. The more details table about the biomass steam boiler is below:
Quckly installed boiler | |||||
boiler model | Unit | DZL1-0.7/1.0-AII | DZL2-0.7/1.0-AII | DZL4-0.7/1.25/1.6-AII | DZL6-1.25/1.6-AII |
capacity | ton/h | 1 | 2 | 4 | 6 |
rated pressure | Mpa | 0.7/1.0 | 0.7/1.0 | 0.7/1.25/1.6 | 1.25/1.6 |
rated steam temeperature | ℃ | 170/184 | 170/184 | 184/193/204 | 193/204 |
feed water temperature | ℃ | 20 | 20 | 20 | 105 |
radiation area | ㎡ | 4.21 | 6.43 | 10.55 | 16.95 |
convection area | ㎡ | 20.68 | 39.23 | 90.45 | 134.87 |
economizer area | ㎡ | 9.66 | 16.56 | 16.56 | 53.13 |
valid grate area | ㎡ | 1.852 | 3.15 | 5.18 | 8.395 |
applicable fuel | * | COAL | COAL | COAL | COAL |
exhaust gas temperature | ℃ | 152/160 | 152/161 | 163/163.8/169.5 | 163/169 |
design efficiency | % | 77.73/77.24 | 78.53/78.18 | 79.37/79.30/78.96 | 79.83/79.19 |
fuel consumption | kg/h | 170.74/172.93 | 341.71/343.63 | 673.22/676.27/682.11 | 866.39/877.51 |
max part size for delivery | mm | 5488*2254*2782 | 5694*2704*3324 | 6743*2954*3508 | 8244*2951*3704 |
TWO PART ASSEMBLED BOILER | ||||||||
boiler model | Unit | SZL6-1.25/1.6-AII | SZL8-1.25/1.6-AII | SZL10-1.25/1.6-AII | SZL12-1.25/1.6-AII | SZL15-1.25/1.6-AII | SZL20-1.25/1.6-AII | SZL25-1.25/1.6-AII |
capacity | ton/h | 6 | 8 | 10 | 12 | 15 | 20 | 25 |
rated pressure | Mpa | 12.5/1.6 | 1.25/1.6 | 1.25/1.6 | 1.25/1.6 | 1.25/1.6 | 1.25/1.6 | 1.25/1.6 |
rated steam temeperature | ℃ | 193/204 | 193/204 | 193/204 | 193/204 | 193/204 | 193/204 | 193/204 |
feed water temperature | ℃ | 105 | 105 | 105 | 105 | 105 | 105 | 105 |
radiation area | m2 | 18.19 | 22.14 | 25.8 | 25.8 | 34.117 | 53.78 | 99.21 |
convection area | m2 | 121.9 | 158.86 | 200.38 | 250.17 | 331.616 | 411.8 | 457.78 |
economizer area | m2 | 53.13 | 104.64 | 130.8 | 174.4/261.1 | 117.72/117.2 | 212.4 | 476.16 |
valid grate area | m2 | 7.55 | 9.34 | 10.98 | 12.78 | 16.24 | 20.84 | 24.76 |
applicable fuel | COAL | COAL | COAL | COAL | COAL | COAL | COAL | |
exhaust gas temperature | ℃ | 165.78/169.85 | 161/165 | 160/162 | 158/150 | 156.7/159.4 | 153/159 | 152/156 |
design efficiency | % | 80.11/79.44 | 79.95/79.98 | 80.55/80.28 | 80.68/80.72 | 80.48/80.56 | 81.09/80.77 | 81.38/81.26 |
fuel consumption | kg/h | 863.28/874.78 | 1153.42/1161.38 | 1430.96/1442.74 | 1714.5/1721.8 | 2167.89/2164.7 | 2868.63/2884.7 | 3551/3556 |
max part size for delivery | mm | 7100*2800*3500 7300*2540*2330 | 7300*3000*3500 7400*2700*2330 | 7600*3200*3500 7700*2900*2330 | 7600*3200*3500 8500*2900*2330 | 7350*3373*3505 8904*3370*1100 | 7814.7*3573*3511 9439*3768*1100 | 8478*2600*2740 Bulk packing |