Large Scale Chain Grate Stoker Bituminous Coal Fired Boiler With Coal Furnace Grates

Brand Name:YONGXING
Certification:ISO9001,ISO14001
Model Number:SZL,DZL
Minimum Order Quantity:1set
Payment Terms:T/T, L/C, Western Union
Place of Origin:HENAN
Contact Now

Add to Cart

Active Member
Location: Zhoukou Henan China
Address: Develop area,Taikang County,Zhoukou City,Henan PR,China
Supplier`s last login times: within 36 hours
Product Details Company Profile
Product Details

Factory supplier bituminous coal fired boiler with coal furnace grates cross girder grate combustion device


Product Description

The coal furnace chain grates is a compact and technologically advanced layer burning device. Mainly by bracket, upper and lower rails, furnace chain, front axle assembly and rear rail, side seal, ash ashing device, coal hopper, front damper and duct. It can be widely used as a combustion equipment in large-scale boilers (which can be used for chain grate boilers with evaporation capacity of 20~90t/h) and various heating and drying equipments. Suitable for burning bituminous coal, lignite and peat. It can also be used as a combustion equipment for renewable fuels such as bagasse, firewood and rice husk.

The fuel of coal furnace grates should meet the following requirements


1. The maximum particle size of the coal block should not exceed 40mm, of which 0~6mm fine coal does not exceed 50% of the total, of which the coal content of 0~3mm is less than 25% of the total.


2. The moisture content of bituminous coal or lignite should be less than 20%, and the moisture content of 8~10% is the best choice.


3. The content of coal ash in coal combustion is between 10% and 30%, and the volatile component should not be lower than 20%.


4. The ash melting temperature of coal burning is less than 1250 ° C, and the coking property of the fuel is very low.


5. The low calorific value of coal combustion should be greater than 4226kcal/kg.


6. The primary air temperature used in this grate should not exceed 200 °C.


Data Sheet

Main technical Parameters of Crossgirder Grate Combustion Device
Boiler Capacity
(t/h)
Active grate
area (m2)
Stoker height
(mm)
Wheel base
(mm)
Active grate width
(mm)
Width between
two endplates
(mm)
Length of shaft
out of grate (mm)
Height of shaft
out of grate (mm)
Dia. of shaft out
of grate (mm)
Qty of
wind chamber
10t/h11.711526443210623581600582Φ1005
15t/h17.619977385266628201829625Φ1005
20t/h19.9811978289265628201708826Φ1208
20t/h22.759977420342635602205625Φ1305
30t/h31.69978507416643002585580Φ1307
35t/h35.3410108000441846702784593Φ1306
35t/h.34.69977477453646702770580Φ1306
40t/h42.1104010153441846702784623Φ1308
65t/h6110308923751076764383623Φ2307
65t/h5610409188665868243957623Φ2307
65t/h57.2710409085692772164153623Φ2307


China Large Scale Chain Grate Stoker Bituminous Coal Fired Boiler With Coal Furnace Grates supplier

Large Scale Chain Grate Stoker Bituminous Coal Fired Boiler With Coal Furnace Grates

Inquiry Cart 0