1994-2000 Audi A4 1.6 1.8 Hydraulic Power Steering Rack LHD For VW Passat 3B2 1.6 1.8 8D1422052X 8D1422065J

Product Description

1994-2000 Audi A4 1.6 1.8 Hydraulic Power Steering Rack LHD For VW Passat 3B2 1.6 1.8 8D1422052X 8D1422065J

Audi A4 Power Steering rack

VW Passat 3B2 Hydraulic Power Steering Rack

1994-2000 Audi A4 Power Steering Rack LHD

Auto parts LHD Steering rack 8D1422052X 8D1422065J

8D1422065J Hydraulic Car steering rack assembly

Audi A4 Power Steering Rack left-hand drive

About steering rack you should know

Notes on the use of steering rack

When driving on potholed and uneven road surface, slow down to reduce the load of steering rack.

Frequently check the protective cover on both sides of steering rack and the protective cover connected with the cross shaft of steering rack

After making four-wheel positioning and adjusting the front bundle and changing the steering tie rod, special attention should be paid to the phenomenon of distortion and improper assembly of the protective sleeve, otherwise it will cause damage to the sheath.

The service condition of the steering rack is bad and the load is large, so special lubricating oil must be used, and ordinary lubricating oil can not meet the service requirements.

Do not at will in the equipment simple, low technical level of roadside shop for the maintenance of the rack.If the steering rack is not adjusted properly, it will cause the phenomenon of jamming, which will endanger driving and personal safety

1. Fault determination of heavy steering

(1), first of all, check whether there is lack of oil, whether the filter element is damaged, whether the pipeline is blocked

(2) when the left and right steering feel is different, should have nothing to do with the pump, first check the steering connecting rod mechanism and steering rack.

(3), The steering process feels uneven power, when heavy or light, first check the steering rack.

(4) Test the output pressure of the steering pump with the help of the pressure detection device.In addition: cold car state at low speed direction is heavy or no rotation, step a few throttle or operation for 2/3 minutes can be eliminated, this is due to the oil viscosity at low temperature is large, the centrifugal force at low speed is small, the rotor blade is not thrown out caused by, is a normal phenomenon.

2. Fault determination of oil leakage

(1) There are old oil stains and no signs of development, which is a normal phenomenon.

(2) It is normal to touch the part with oil without obvious humidity.

(3) Oil leakage at the joint of pump and tubing is usually caused by damage of the sealing ring (pad) of connection loose cargo, tightening or replacing the sealing ring (pad).

(4) If the steering pump leaks oil in other locations and there are signs of development, the steering pump needs to be replaced.

3. Fault determination of abnormal sound of steering system

(1) The sound made when the steering wheel is killed is the sound of the steering pump safety valve opening, which is a normal phenomenon.(Note: Don't beat the steering wheel to one side for more than 10 seconds.)

(2) Air leakage in the pipeline of the steering system (there are bubbles in the oil can at this time) and lack of oil will also cause abnormal sound of the steering pump.

(3) in winter, there is abnormal sound in a short time after the cold car starts, and it disappears after the hot car, which is a normal phenomenon.

(4) abnormal sound does not change with the rotation of the steering wheel, which is generally not a problem with the steering pump.

(5) When the steering is abnormal in one direction or a certain position, it is necessary to focus on checking the steering connecting rod mechanism and steering rack.

Hot Sale

Our company's main Korean/ Japanese/ American /European auto parts have suspension parts, chassis parts, steering parts, brake parts, engine parts,clutch parts, electronic parts, transmission parts,car body parts, modeified parts Truck parts. Your are welcome to Inquiry

Delivery &Parking

Our Service

1. Reply your inquiry in 24 working hours.

2. Once you place order to us, our stuff will track your order, let you know the newest process until you have received it.

3. Deliver the goods to our customer with speed and precision.

4. Offer customer good price with high quality product.

5. One-stop purchase platform for Auto parts helps you lower your purchasing cost of the parts

FAQ

Contact Information

Welcome your inquiry for more details and better price or Via my WeChat or WhatsApp for communication

Focus on High quality Motorcycle Spare parts all over the world.

Huangshan Benma Group Co.,LTD,Which has focus on the motorcycle parts over 35 years, With core technology of friction material ,Now the brand motorcycle clutch plate and brake pad has been very popular in china, In 2017 ,group turnover is more than 3 0 million USD dollars.From 2010 we start to expand our business to motorcycle engine parts, motorcycle electronic parts, Motorcycle brake parts and CNC parts, to service all our customer with wide range of parts,with excellent factory price and good servies.

Benma Group -The clutch friction plate has dominated china market 70% and get very popular in china. For the brake pad with less metallic fomular with no noise no harm to disc.

Benma Group fast grow from 2010 we start to export differnt kinds of high quality parts for motorcycle.until now we have partner in Middle east, South America and Asia for many different of parts,Including engine parts, Body parts, Transmission parts,

we care quality as our life ,care trust as our soul,we warmly welcome all over wold friend to join with us for a bright future business for motorcycle spare parts together.

HUANGSHAN BENMA GROUP has more than 35 years experience on manufacturer of motorcycle parts, and with 20 years export experiences.We ensure you the best business coopeation with us.

Our Strengh:

1. With Self-own R&D centre and more than 20 patent on friction technology to leading the future.

2. With self-own 5 factory to make sure the various parts supply by ourself and reduce the cost for our partners.

3. Full factory with 5s management and ISO/TS16949 system to ensure the quality level of each product.

4.Mass automatic machine been used to replace manual machine to save the cost and reduce the NG during production.

5.Experienced Sales Team to guide your purchase and make sure you got the goods safely.