Power steering rack For DMAX 8-97438305-0 8-97946129-1 8-97946130-1

OEM number

Reference No

Application For

Steering Rack / Rack and pinion steering

1. How does steering rack work

Rack and pinion steering uses a gear-set to convert the circular motion of the steering wheel into the linear motion required to turn the wheels. It also provides a gear reduction, so turning the wheels is easier.
It works by enclosing the rack and pinion gear-set in a metal tube, with each end of the rack sticking out from the tube and connected to an axial rod. The pinion gear is attached to the steering shaft so that when the steering wheel is turned, the gear spins, moving the rack. The axial rod at each end of the rack connects to the tie rod end, which is attached to the spindle.

Most cars need three to four complete turns of the steering wheel to go from lock to lock (from far right to far left). The steering ratio shows you how far to turn the steering wheel for the wheels to turn a certain amount. A higher ratio means you need to turn the steering wheel more to turn the wheels a certain amount and lower ratios give the steering a quicker response.
Some cars use variable ratio steering. This rack and pinion steering system uses a different number of teeth per cm (tooth pitch) in the centre than at the ends. The result is the steering is more sensitive when it is turned towards lock than when it is close to its central position, making the car more maneuverable.
There are two main types of rack and pinion steering systems:
End take off – the tie rods are attached to the end of the steering rack via the inner axial rods.
Centre take off – bolts attach the tie rods to the centre of the steering rack.

2.How does steering rack work with power steering

When a rack and pinion system is connected to a power steering system, the design changes slightly. A cylinder with a piston in the middle is placed in the rack. There is fluid on both sides of the piston. When pressure is placed on the fluid on one side of the piston, it forces the piston to move, which turns the rack and assists with steering.

3.Common steering rack problems

-1 .Very tight steering wheel
If it is becoming more difficult to turn your steering wheel, it’s a sign that there’s probably a problem either with your steering rack or a lack of pressure from the power steering unit. The solution could be as simple as adding more power steering fluid, but it’s best to get it checked.
-2.Leaking power steering fluid
Power steering fluid levels only decrease and result in tight steering if there is a leak. This isn’t a big problem, however the consequences for leaving it too long include causing the steering gearbox and steering rack to overheat or gears to break. It is recommended to get this fixed when it is a simple (and cheap) task. Click here for more information about the causes of these leaks
-3.Grinding noise when steering
A grinding noise from your steering gearbox comes from metal-on-metal contact, suggesting a lack of lubrication. You’ll be able to hear it clearly when you turn either left or right. Ask your mechanic to take a look at the problem, as your steering gearbox could need replacing.
-4.Burning oil smell
Power steering fluid smells like burning oil, so if you smell it when driving it’s a sign that the steering gearbox is too hot. It’s best to stop your car as soon as possible and get the problem looked at it. Driving with an overheated steering gearbox can result in fire.

packing&Delivery

Our service

1. OEM Manufacturing welcome: Product, Package...

2. Sample order avaliable

3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solutions for you.

We have all the steering racks , welcome to contact me to know more

Focus on High quality Motorcycle Spare parts all over the world.

Huangshan Benma Group Co.,LTD,Which has focus on the motorcycle parts over 35 years, With core technology of friction material ,Now the brand motorcycle clutch plate and brake pad has been very popular in china, In 2017 ,group turnover is more than 3 0 million USD dollars.From 2010 we start to expand our business to motorcycle engine parts, motorcycle electronic parts, Motorcycle brake parts and CNC parts, to service all our customer with wide range of parts,with excellent factory price and good servies.

Benma Group -The clutch friction plate has dominated china market 70% and get very popular in china. For the brake pad with less metallic fomular with no noise no harm to disc.

Benma Group fast grow from 2010 we start to export differnt kinds of high quality parts for motorcycle.until now we have partner in Middle east, South America and Asia for many different of parts,Including engine parts, Body parts, Transmission parts,

we care quality as our life ,care trust as our soul,we warmly welcome all over wold friend to join with us for a bright future business for motorcycle spare parts together.

HUANGSHAN BENMA GROUP has more than 35 years experience on manufacturer of motorcycle parts, and with 20 years export experiences.We ensure you the best business coopeation with us.

Our Strengh:

1. With Self-own R&D centre and more than 20 patent on friction technology to leading the future.

2. With self-own 5 factory to make sure the various parts supply by ourself and reduce the cost for our partners.

3. Full factory with 5s management and ISO/TS16949 system to ensure the quality level of each product.

4.Mass automatic machine been used to replace manual machine to save the cost and reduce the NG during production.

5.Experienced Sales Team to guide your purchase and make sure you got the goods safely.