Large Air Capacity Mechanical Steam Compressor Vapor Recompression Mvr Blower Pump
Brand Name:DICHENG
Certification:ISO9001, CE, SGS
Model Number:DFSR-WN
Minimum Order Quantity:1 set
Delivery Time:Generally, it will take 5-20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Place of Origin:SHANDONG
Contact Now
Add to Cart
Active Member
Address:
East of Houjia Village South Road, Mingshui Street, Zhangqiu District, Jinan City, Shandong province, 250200 China.
Supplier`s last login times:
within 9 hours
Product Details
Company Profile
Product Details
Mechanical Vapor Recompression Mvr Blower Pump Steam Compressor
MVR Roots Steam Compressor
Our company's MVR roots steam compressors have been developed with
air capacity from 5 m3/min to 130 m3/min. The maximum pressure
difference between inlet and outlet is 58.8Kpa to 80Kpa.
Specific parameters are shown in the following table:
| Model | Air capacity (m3/min) | Differential pressure (Kpa) | Rotating speed (rpm) |
| DFSR-100WN | 5-9 | 58.8-80 | 1000-1650 |
| DFSR-125WN | 10-22 | 58.8-80 | 870-1650 |
| DFSR-150AWN | 20-30 | 58.8-80 | 980-1580 |
| DFSR-200BWN | 24-45 | 58.8-80 | 930-1550 |
| DFSR-250WN | 45-76 | 58.8-80 | 750-1250 |
| DFSR-300WN | 75-130 | 58.8-80 | 750-1250 |
Note:
1. The air capacity in the table is measured when the pressure
difference between the inlet and outlet is 40Kpa. The maximum
allowable pressure difference of the actual MVR compressor can be:
A- FSR-250WN, FSR-300WN, the maximum allowable differential
pressure is 60Kpa
B- FSR-100WN, FSR-125WN, FSRSR-200WN, FSRSR-250WN, the maximum
allowable differential pressure is 80Kpa.
2. In the table, rotating speed is the recommended value. Don't try
to exceed the range.
MVR steam recompression principle
MVR (mechanicak vapor recompression) is an abbreviation of
Mechanical Steam Recompression Technology. MVR uses the secondary
steam generated by the evaporation system and its energy to upgrade
the low-grade steam to the high-grade steam heat source through the
mechanical work of the steam compressor. An energy-saving
technology that provides heat energy to the evaporation system so
as to reduce the demand for external energy. In theory, the MVR
technology saves more than 80% of energy compared to traditional
evaporators, saves more than 90% of condensate, and reduces
footprint by more than 50%.
MVR roots steam compressor features
Shell: The inlet adopts spiral type. When the impeller rotates, the gas
enters the shell through the spiral line to form a circular cavity,
thus reducing the pulsation of the blower.
Material selection 304/316L/2205/HT200+Ni-P
Rotor: Three-leaf or two-leaf type, compound type line, Impeller area
utilization factor 0.5, volume efficiency increases 5%, noise
reduces about 5dB
Material selection 304/316L/2205/HT200+Ni-P
Wallboard: The surface is provided with a backflow groove. This structure can
increase the compression ratio of the blower and can also help
reduce the noise of the blower.
Material selection 304/316L/2205/HT200+Ni-P
Mechanical seal: Double-faced container-type mechanical seal, moving ring using
silicon carbide or graphite, static ring using carbide steel, easy
installation and maintenance, special design structure, use more
reliable.
Bearings: Positioning bearings are NSK bearings that are imported from
Japan.
Gears: High-precision grinding gears are used to reduce mechanical noise,
and the accuracy reaches level 5 of the national standard
GB/T10095-2008.
Common Problem Solution of FSR-WN Roots Steam Compressor
1. Corrosion
1) Optional SUS304, SUS316, SUS329 stainless steel. SUS304 and
SUS316 are used for relatively
small conditions of temperature rise. SUS329 stainless steel is
used for high temperature and
severe working conditions due to its small thermal expansion
coefficient and good corrosion
resistance.
2) Cast iron can be used to add Ni-P coating or Teflon coating. The
advantage is that the coefficient
of thermal expansion of cast iron is much lower than that of
stainless steel, which can effectively
prevent the rotor from being locked up during rotation.
2. Sealed form
Sealing forms include:
multiple labyrinth seals,
Double shaft seal (VITON oil seal prevents oil in the mailbox from
entering the side/main housing, Viton seal),
Air blowback seal,
Machinery Seal,
Such as, a variety of flexible forms of sealing combination, can
guarantee the compressor under positive pressure or negative
pressure working conditions, in water vapor or alcohol vapor and
other different media environment, the seal can be long-term
effective and reliable
3. Cavitation
1)The peripheral speed of the control rotor is 30 m/s lower than
the peripheral speed at which no cavitation occurs at present.
2) Adopt SUS329 stainless steel with good cavitation resistance.
3) The inlet of the Roots steam compressor is sprayed with an
appropriate amount of spray water to control the outlet
temperature.
MVR Project
Production Workshop
FAQ
1. What's the information should I provide when inquiry?
A: Air capacity.
B: Inlet pressure and outlet pressure.
C: Inlet temperature and outlet temperature.
D: Use environment(Temperature, atmospheric pressure)
E: Do you need motor?
Or other specials you give us will be more appreciated.
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During
the warranty period, replace the damaged parts for free of charge.
Out warranty period, to provide timely, high-quality technical
services and price concessions spare parts to ensure continuous
safe and high-quality equipment operation.
3. How long is the service life of roots blower?
In normal use environment
A- Service life of blower is more than 10 years.
B- Service life of Impeller is more than 60,000 hours.
C- Service life of bearing is more than 50,000 hours.
D- Service life of gear is more than 60,000 hours.
4. What is your terms of packing?
A: Generally, we pack our goods in Fumigation Free Plywood Case. If
you have legally registered patent, we can pack the goods in your
branded boxes after getting your authorization letters.
5. How does your factory control product quality?
We have quality inspection department. Before sending out product,
we check each product. If there is quality problem, we will produce
new one.
6.What are your terms of payment?
1. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE
SHIPPING.
2. 100% IRREVOCABLE L/C AT STGHT.
Large Air Capacity Mechanical Steam Compressor Vapor Recompression Mvr Blower Pump
Inquiry Cart
0