Fashion Grey Color Hooded Bomber Jacket Mens With Black Rib And Mesh Lining

Men's Grey Polyester Bomber hooded Jacket With black rib and mesh lining TW83339

SPECIFICATIONS :

MEASUREMENTS:

Styling - Front:

HOOD:
- 3 Panel hood as per original.
- Panel seams of hood to be finished with foot stitch.
- Hood opening to be finished with tunnel stitch
- At drawcord opening to have 2x black coated eyelets. 9mm diameter.
- Chunky round drawcord; 8mm diameter, black, slightly finer weave than drawcord on sample.
- To have toggle on drawcord between the two eyelets as per sample
- Drawcord ending to come out at bottom of tunnel as per sample
- Drawcord endings to be rubber sealed; colour of seal = black. Drawcords must be knotted before sealing
- Front neck to be raised as per original.
- Finish neck seam with 5mm edge stitch.

SHOULDER SEAM:
Finish with edge stitch

CF ZIP:
-Change to size 5 reversed coated nylon coil zip
-To have branded black metal puller with black plastic tip. Tip to have raised swish

CHEST ZIP:
At LHSW
-Size 5 reverse nylon coil zip
-To have branded black metal puller with black plastic tip. Tip to have raised swish
-Zip to be concealed with a welt, finish welt with an edge stitch
-Functional pocket with poly lining

BOTTOM ZIPS:
-Slanted reverse nylon coil size 5 zips with rubber coating
-To have branded black black metal puller with black plastic tip. Tip to have raised swish

-Zips to have self fabric welt above zip, 2cm length
-Finish around zips with edge stitch
-Functional pocket with poly lining

PRINT AT RHSW:
- Chest print on LHSW chest
- Print to be 25mm in height, width adjusted propotionately

SIDE SEAM:
Finish with twin needle as per sample

HEM:
Self fabric inset at CF, finish with foot stitch
To have 1x1rib hem with good recovery, 5.5cm wide

SLEEVE:
-Standard set in sleeve
- Finish at armhole with foot stitch
- Cuff to be finished as original, 1x1 rib with good recovery. Cuff width 5.5cm
-Finish above cuff with foot stitch

BADGE ON SLEEVE:
Rubber badge
Black base, white wording

Back:

HOOD:
- 3 Panel hood as per sample.
- Panel seams of hood to be finished with foot stitch.
- Hood opening to be finished with tunnel stitch
- Finish neck seam with 5mm edge stitch.

BODY:
Horizontal cutline across back as per sample

SLEEVES:
As per front

HEM:
As per front

Inside:

HOOD LINING:
Mesh as original, black

BODY LINING:
Mesh as original, black

SLEEVE LINING:
To be poly as original, black

LABEL AT CB:
Black flat label with white wording, design attached
To be laid onto self fabric patch creating a 1cm border around label

TAPE LOOP:

As original, colour to be black

STORM FLAP:
As original, 2cm wide

INTERNAL POCKET:
Vetical welt pocket with popper closure as per sample
Finish with edge stitch

Specification

Locattion:

Haining Idol was set up in September 2013, which is located Haining city, Jiaxing, Zhejiang Province, 100km far away from Hangzhou, 150km from Shanghai. It is very convenient for customer to visit us or control quality.

Products:

Our main products is jacket, coat, faux leather jackets, faux fur jackets and denim garments.

Jackets fty:

Jiaxing Qingyang Garments Co.,Ltd is located Hanyan county,Jiaxing city, Zhejiang province.

Denim fty:

Guangzhou Easycom Garments Co.,Ltd is located in Xintang town,Zhongshan Guangzhou.

Brand we are doing:

We do a lot of brand, Levi's, Dockers, River Island, Daniel Hechter,Esprit etc.

Contry we export to:

Our products are exported to America, Chile, Brazil,Spain, German, Sourth Africa Austrilia and so on.

The work we are doing:

We have a excellent team who work very hard to service our customer and fty. We are building a bridge between overseas customer and fty. We are looking forward to establish business cooperation with you in near future.