

Add to Cart
Description
The 3500 Power Supplies are half-height modules and must be
installed in the specially designed slots on the left side of the
rack. The 3500 rack can contain one or two power supplies (any
combination of ac and/or dc) and either supply can power a full
rack. If installed, the second supply acts as a backup for the
primary supply. When two power supplies are installed in a rack,
the supply in the lower slot acts as the primary supply and the
supply in the upper slot acts as the backup supply. Removing or
inserting either power supply module will not disrupt operation of
the rack as long as a second power supply is installed.
The 3500 Power Supplies accept a wide range of input voltages and
converts them to voltages acceptable for use by other 3500 modules.
Three Power Supply versions are available with the 3500 Series
Machinery Protection System as follows:
•
AC Power
•
High Voltage DC Power Supply
•
Low Voltage DC Power Supply
Specifications
Inputs
Voltage Options:
High Voltage ac
This option uses the ac Power Supply and the High Voltage ac Power
Input Module (PIM).
Input Voltage
220 Vac nominal
175 to 264 Vac rms
247 to 373 Vac pk
Note: Installations using ac Power Input Modules (PIM) prior to
Rev. R and/or AC Power Supply Modules prior to Rev. M require an
input voltage of 175 to 250 Vac rms.
Input Frequency
47 to 63 Hz
3500/42-01-00, |
3500/50-01-00-01, |
3500/92-04-01-00, |
330105-02-12-10-02-00, |
330130-080-00-05, |
330130-045-00-00, |
3500/93 |
3500/94 VGA Display |
3500/95 |
3300/03 SDI/DDI System Monitor |
3300/16 |
3300/20 |
3300/36 |
3500/25 125800-01 135473-01 |
3500/32 125720-01 |
3500/33 149992-01 |
3500/40M 125680-01 135489-04 |
3500/42M 128229-01 |