KZ48 Servo Motor Rotary Encoder Taper Shaft 9mm 4096 Resolution 8 Poles Line Driver 26LS31 A-ZKD-12-250BM/2P-G05L-C
Brand Name:HENGXIANG
Certification:CE,ISO9001
Model Number:KZ48 hall sensor rotary encoder
Minimum Order Quantity:1 piece to start order
Delivery Time:3-5 working days for sample order, 7-15 working days for mass order
Payment Terms:D/A, D/P, T/T, Western Union, Credit Card, Master Card, Paypal, etc
Contact Now
Add to Cart
Active Member
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
KZ48 Servo Motor Rotary Encoder Taper Shaft 9mm 4096 Resolution 8 Poles Line Driver 26LS31 A-ZKD-12-250BM/2P-G05L-C
Lead time
3-5 working days for sample after full paid
7-15 days for mass production after full paid
Process of payment:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Factory Encoder Production Capability
5000 pieces per month
-------- Production Line Capacity
50000 pieces per year
--------Actual Units Produced (Previous Year)
Product Basis information of KZ48 Encoder
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| Outlet type | Cable out from side |
| Output mode | NPN/PNP(Open Collector Output) |
| Voltage output | |
| Push-pull output | |
| line drive (26LS31) TTL | |
| line drive(DC8-30V) HTL | |
| TTL(DC5V) phase ABZ are back of phase UVW | |
| Protection grade | IP40 |
| Cable length | 500mm |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| Insulation strength | AC500V 60s |
| Insulation resistance | 10MΩ |
| GND | not connect to encoder |
| Mark to Space ratio | 45% to 55% |
| starting torque | less than 9.8x 10-3 N.m |
| Intertia moment | less than 6.5x 10-6kg.m2 |
| Shaft load | Radial 50N; Axial 30N |
| Top REV | 5000RPM |
| Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
| Environmental temperature | Operating:-20 ～+80°；storage:-25 ～+90° |
| Environmental humidity | Operating and storage: 35-85%RH(noncondensing) |
| Vibration(endure) | Amplitude 0.75mm,5-55Hz,2 hours for three axis individually |
| Sock(endure) | 490m/s2 ,11 ms three times for X,Y,Z direction individually |
| Material | die cast aluminum |
| Certification | CE |
| package | Carton box |
| Net weight | About 140g (with package) |
Related Part No. of KZ48 Encoder
KZ48-J3FH1024
KZ48-J4E1200
KZ48-J6C2000
KZ48-J12E1000/4
KZ48-J2C2500
KZ48-J3V3600
KZ48-J4C4096
KZ48-J6E5000
KZ48-J12C1024/4
KZ48-J12E1200/6
KZ48-J12C2048/8
About Encoder Vibration
Vibration acting on an encoder always cause wrong pulse easily.
So we have to pay more attention to encoder working place.
The more pulse per round, the narrower groovy spacing of grating, ore effect to encoder by vibration, when motor speed is low or even stopped, vibration acting on encoder shaft or encoder shell would cause grating vibration, in this way, encoder might show wrong pulse signal.
KZ48 Servo Motor Rotary Encoder Taper Shaft 9mm 4096 Resolution 8 Poles Line Driver 26LS31 A-ZKD-12-250BM/2P-G05L-C
Inquiry Cart
0