

Add to Cart
Description
Temperature Humidity Controlled Chamber can realize both high and
low temperature test.
It can continuously run for long time.
Controller display easy to understand and operate.
Equioment Types
●Temperature Only
●Temperature & Humidity
●Cascade Refrigeration System
Main Parameter
Name | Temperature Humidity Controlled Chamber | ||
Model | TH-100 | TH-1000 | |
Internal Dimension (mm) | 400*500*500 | 1000*1000*1000 | |
Overall Dimension (mm) | 860*1050*1620 | 1550*1550*2110 | |
Interior Volume | 100L | 1000L | |
Heat load | 1000W | ||
Temperature Range | A : -20℃ ~ +150 ℃ B : -40℃ ~ +150 ℃ C: -70℃ ~ +150 ℃ | ||
Temperature Fluctuation | ± 0.5 ℃ | ||
Temperature Deviation | ± 2.0 ℃ | ||
Humidity Range | 20% ~ 98% RH | ||
Humidity Deviation | ± 2.5% RH | ||
Cooling Rate | 1 ℃ / min | ||
Heating Rate | 3 ℃ / min | ||
Cooling system | Mechanical compression refrigeration system | ||
Refrigerating unit | French TECUMSEH compressor | ||
Refrigerant | R404A, R23 | ||
Heating Element | Nichrome heater | ||
Controller | Programmable color LCD touch screen controller | ||
Ethernet connection, PC Link |
Main Details
Adjustable Shelf | Test Ports |
Viewing Window LIB unique design virtually eliminates exterior window sweating during normal temperature cycling conditions. | Automatic Feed and Drain System |
Accurate Humidity Measurement
●Reliable Vapor Generator
The heated vapor generator has no pump to fail or orifice to clog.
The stainless-steel vapor generator assembly is protected against
low-water and over-temperature conditions. The immersion heater has
an embedded thermocouple for fast-responding thermal protection.
●Heated Viewing Widow
Eliminates fog and condensation without a manual wiper.
●Water Recirculation System
Water recirculation system provides a reliable source of
demineralized water for the humidity system, using ordinary tap or
pre-filtered water. Condensate from the chamber is returned back to
the water tank. Perfect for installations where a water line and
drain are not available.
Factory Acceptance Inspection
1. Whether the appearance of the product equipment is complete and
the size meets the requirements
2. Inspect performance and parameter according to datasheet
3. Whether the accessories of the equipment parts are complete and
complete
4. Conduct special testing and debugging of the entire equipment
for different countries and regions.
Hot-Sale Products
Small Temperature Chamber | Thermal Cycling Test Equipment |
Salt Spray Corrosion Test Chamber | Xenon Arc Test Chamber |