Add to Cart
Product Information:
BSJD360T and BSJD400T mast mobile container crane is specially
designed for small and medium size freight yard, her advantage is
the lowest operating cost among all kinds of container cranes. This
equipment is powered with multi-cylinder diesel engine, with good
features of low noise and low vibration. Lifting and walking are
both controlled by hydraulic system, driving by hydraulic motor.
Diameter of lifting cylinder is 200mm, the more the loading
capacity, the smaller the pressure of lifting system, it is
absolutely steady and safe when lifting and declining, and with
high efficiency of loading or unloading. Each equipment is composed
of two cranes, each crane is an independent motor unit, each motor
unit is two-wheel driving(2WD), four-wheel steering(4WD), the max.
turning angle is 90 degrees, can steer and shift at any angle. With
small turning radius, it can be operated flexiblely. And the two
motor units both can move freely, the space between also can be
adjusted at will, it can be used for lifting various containers.
This equipment should be used on flat, hardening and no pothole
container yards. It is applicable to load or unload for logistics
companies, warehouses, piers, container yards, freight yards, etc.
It is a super quality and competitive price, convenient and
practical container lifting equipment.
Specifications:
Specifications of mast mobile container crane | |||
Model No. | BSJD300T | BSJD360T | BSJD400T |
Load capacity | 30 Ton | 36 Ton | 40 Ton |
Max.lifting height | 4660mm | 4660mm | 4660mm |
Max.lifting speed | 0.065m/s | 0.065m/s | 0.065m/s |
Engine type | Xinchang C490 engine | Xinchang C490 engine | Xinchang C490 engine |
Engine power/rotate speed | 22KW / 2700r/min | 22KW / 2700r/min | 22KW / 2700r/min |
Max.torque/rotate speed | 70.2/1960~2240[Nm/r min] | 70.2/1960~2240[Nm/r min] | 70.2/1960~2240[Nm/r min] |
Max.travel speed | 3.5km/h | 3.5km/h | 3.5km/h |
Diameter of lifting cylinder | 203mm | 203mm | 203mm |
Pressure of lifting system | 10Mpa | 10Mpa | 10Mpa |
Diameter of steering cylinder | 75mm | 75mm | 75mm |
Min.turning radius | 4500mm | 4500mm | 4500mm |
Pressure of steering system | 15Mpa | 15Mpa | 15Mpa |
Torque of hydraulic motor | 949Nm | 949Nm | 949Nm |
Rotate speed of hydraulic motor | 6~400r/min | 6~400r/min | 6~400r/min |
Diameter of drive wheel | 450mm | 450mm | 450mm |
Min.under-clearance | 80 | 80 | 80 |
Suitable carriage height | 1.45m/1.75m | 1.45m/1.75m | 1.45m/1.75m |
Overall length | 4900mm | 4900mm | 4900mm |
Overall width | 2500mm | 2500mm | 2500mm |
Overall height | 6600mm | 6600mm | 6600mm |
Total weight | 7.0 Ton | 7.5T | 8.0T |