LS-EC100 Wireless Irrigation Controller Soil Conductivity Sensor For Moisture / Temperature
Brand Name:Lensen
Model Number:LS-EC100
Minimum Order Quantity:1pc
Delivery Time:2-6 days
Payment Terms:T/T, Western Union
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
701, Yongchang Building, Xicheng Industrial Zone, Xixiang, Bao'an District, Shenzhen, China 518126
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
LS-EC100 Wireless Irrigation Controller Soil Conductivity Sensor For Moisture / Temperature
LS-EC100 soil conductivity sensor has stable performance and high sensitivity. It is used to monitor and study the soil’s salinity. As an important tool for soil moisture monitoring, LS-EC100 is widely used for scientific experiment, water-saving irrigation, greenhouse, flower and vegetable irrigation, plant irrigation, soil measurement, waste water treatment, agriculture monitoring and so on.
LS-EC100 sensor has the following characteristics:
(1) Can measure conductivity of soil, fertilizer solution, and other nutrients.
(2) With special alloy materials, electrode can bear strong external impact to prevent damage.
(3) Good sealness, non-corrosiveness of acid and alkali. Can be buried in the soil or directly thrown into the water for long-term dynamic detection.
(4) high precision, fast response, good interchangeability, probe plug-in design to ensure accurate measurement, reliable performance.
(5) perfect protection circuit. Kinds of signal output interface optional.
Technique parameter
| Technique parameter | |||
| Signal output type | Voltage output: 0-2V (output impedance: 0 ohms) | Current output: 4-20mA (load resistance <500ohm) | RS485 port Modbus protocol |
| Power supply | 3.6-30V/DC | 12-30V/DC | 3.6-30V/DC |
| Static power consumption | 6mA@24V DC | 50mA@24V DC (2 channels current output: 20mA) | 6mA@24V DC |
| Measure range | 2 types:0-50%,0-100% Resolution:0-50% 0.03%,50-100% 1% Accuracy:0-50% 2%,50-100% 3% | ||
| Conductivity range | 0-5000us/cm,10000us/cm,20000us/cm optional 0-10000us/cm 10us/cm, 100000-20000us/cm 50us/cm Accuracy: 0-10000us/cm, ±3%; 10000-20000us/cm, ±5% | ||
| Temperature compensation | build-in temperature compensation sensor, compensation range 0-50℃ | ||
| Temperature measure range | ranges:-40~80℃,resolution:0.1℃,accuracy:±0.5℃ | ||
| Measurement method | Moisture: FDR Conductivity: AC bridge plug into the soil or immersed into the solution directly. | ||
| IP level | IP68 | ||
| Working environment | -40~85℃ | ||
| Probe material | special designed Anti-corrosion electrodes | ||
| Seal material | black flame retardant epoxy resin | ||
| Installing way | Completely buried or probe insert into solution | ||
| Cable length | Conventional 2m, or length customize | ||
| Connection way | Pre installed cold pressed terminals | ||
| Dimension | 45*15*145mm | ||
| Electrode length | 70mm | ||
Wiring method
| Types | Wiring diagram |
| Voltage output type | Red V+: Power supply Black G: Ground of power supply Blue O1: output signal (temperature) Brown O2: output signal (electronic conductivity) |
| Current Output type | Red V+: Power supply Black G: Ground of power supply Blue O1: output signal (temperature) Brown O2: output signal (electronic conductivity) |
| RS485 Modbus Protocol | Red V+: Power supply positive Black G: Ground of power supply Yellow T+: RS485+/A/T+ White T-: RS485-/B/T- Green SET: connecting to V+ (power positive), power on, it enters to setup mode Connecting to G(power ground) or no connection, power on, it enters to run mode |
LS-EC100 Wireless Irrigation Controller Soil Conductivity Sensor For Moisture / Temperature
Inquiry Cart
0