1200kw Fully Automatic Natural Gas Oil Fired Hot Oil Heater Thermal Oil Boiler For Coating Plant

1200kw Fully Automatic Natural Gas Oil Fired Hot Oil Heater Thermal Oil Boiler For Coating Plant

Thermic Fluid Heater, thermal oil boiler

Heat Power:300,000-2,000,000 Kcal/H

Working Pressure :0.8 Mpa

Fuel :light oil,heavy oil,diesel

Application : textile printing and dyeing, plastic and rubber, paper industry, wood industry, building material, food industry

YY(Q)W series oil fired thermal oil boiler is an safe and energy saving boiler with working characteristics of low working pressure (0.8 MPa) and high temperature (330℃).

The heat carrier is heat conduction oil, the circulating pump force heat transfer medium circulating in liquid phrase, and transfer heat to heat user equipment, then return to the heating furnace for reheating. Jinzhen Boiler has a mature R&D and design team, could customize the boilers based on customers’ requirement.

Boiler Features

1. The top of the thermal boiler(hot oil boiler) is equipped with a top coil tube, which effectively prevents the flame from directly radiating the rear wall. At the same time, under the premise of a compact structure, it increases the radiation heating area and improves the boiler's thermal efficiency.

2. The use of micro positive pressure operation effectively improves the combustion intensity of the furnace, makes the volume of the boiler with the same capacity smaller, and eliminates the air leakage of the furnace and flue of the boiler, and improves the thermal efficiency of the boiler.

3. Using advanced EDA technology, detailed calculation of furnace body size, flue gas flow rate, reasonable and full use of flame and flue gas heat exchange to ensure reliable operation and sufficient cooling of the boiler, and improve the boiler's thermal efficiency.

4. The use of high-efficiency condensation technology effectively reduces the temperature of exhaust gas and improves the thermal efficiency of the boiler.

5. Adopt reasonable structure design and excellent refractory and heat insulation materials, greatly reduce the surface temperature of the furnace body, make the surface temperature lower than 50 degrees (higher than the national standard), reduce heat loss, and improve the thermal efficiency of the boiler.

6.Adopt a new design to reduce the emission of harmful substances during fuel combustion, meet the national environmental protection standards, especially reduce the emission of nitrogen oxides, and meet the national low nitrogen emission standards.

Technical Parameters

Thermal oil boiler is a kind of energy saving heating equipment, it can get a high temperature (around 350℃) under a low working pressure (0.8MPa). The working medium is hot oil, a circulating pump forced hot oil circulating in liquid phrase, and transfer heat to heat user equipment, then return back to the boiler for reheating. The fuel could be both oil and gas, based on the characteristics of fuel, the hot oil boiler could be equipped with different burners.

Full set fuel (gas) thermal oil boiler is consist of Horizontal boiler body, Boiler Burner (imported famous brand), Instruments, Chimney, Circulating Pump, Oil Filling Pump,Expansion Tank, Oil Storage Tank, Oil Gas Separator,Electric Control Cabinet (Chinese & English Version), Economizer (Optional),etc.

Thermal Oil Boiler For Hot Press takes diesel, gas, town gas as fuel. Three pass and wet back structure enhance it's thermal efficiency and lower flue gas temperature. Thicker insulated material layer makes radiating at minimum limit.

All boilers are assembly structure which is easy for installation by just connecting system device by pipes. Intelligent system control makes boiler operation easier and more simple. Controller with imitation screen display has auto igniting, burning, circulation pumps control, alarm, etc. functions.

The Gas/Oil Fired thermal oil boiler auxiliaries

oil fired thermic fluid heater hot oil boiler

Application

industrial thermal oil heater for non-woven hot rolling mill heating

It can be applied in the following areas: high-temperature shaping, plate heating, rubber, drying, dyeing and printing, chemical industry, plywood production, rolled water-proof material production, asphalt heating, non-woven hot-rolled machine, fiber, glass hot press machine, reactor, mould, drying room, oven, and other heating industries.

FAQ

1.What is the highest temperature that thermal oil heater could achieve?

thermal oil heater can reach as high as 330℃, and working under low pressure (<1.0MPa)

2.What are the heat-resistance temperature of grate and furnace?

The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100℃, and the lower temperature could be 700℃.

The highest heat resistance temperature of furnace could be about 1700℃~1800℃.

3.What is conduction oil/ hot oil / heat transfer fluid?

Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350℃, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.

6sets 150000kcal/h thermal oil boiler can be packed into one 20GP

2sets 200000kcal/h thermal oil boiler can be packed into one 20GP

2sets 300000kcal/h thermal fluid boiler can be packed into one 20GP

1 set 600000kcal/h hot oil boiler can be packed into one 20GP

1 set 1000000kcla/h hot oil boiler can be packed into one 20OP

1 set 1200000kcal/h to 3000000kcla/h can be packed into flat rack

Henan Jinzhen Boiler Co., Ltd is a professional industrial boiler manufacturer that specialized in the environment-friendly steam boiler, hot water boiler, thermal oil boiler and pressure vessels’ design, manufacture, installation, maintenance. Jinzhen Boiler factory is located in beautiful Zhoukou City which nearby Zhengzhou Airport, Shangqiu Railway Station, gets convenient traffic.We have over 6,000sq.m. building area, 105 employees, annual sales amount exceeds 25,000,000USD which includes 25% export amount in worldwide.

Jinzhen boilers include more than 150 kinds. There are:
(1) DZL coal/biomass fired steam boiler(1-20ton/h;)
(2) DZH wood fired steam boiler(0.5-6ton/h;)
(3) SZL biomass/coal fired steam boiler(4-25ton/h;)
(4) WNS series gas/oil fired steam boiler(0.5-20ton/h;)
(5) YLL(W) series coal/biomass fired thermal oil boiler(150,000-16,000,000Kcal)
(6) YY(Q)W gas /oil fired thermic fluid heater(150,000kcal-12,000,000Kcal)

All industrial boilers comply with GB/T quality standards and are greatly appreciated in a variety of markets throughout the world.Well-equipped facilities and excellent quality control throughout all production stages to totally guarantee customers' satisfaction.

As a result of high quality boiler and outstanding customer service, we have gained a global sales network reaching America, Australia, Mexico, Vietnam, Russia, Kazakhstan, South Africa, Syria,South Africa, Ethiopia, etc.