

Add to Cart
High Temperature Oil Gas Fired Thermic Fluid Heater For Plywood Hot Processing
The organic heat carrier furnace is a new type of special boiler, also known as the heat-conducting oil furnace, with low pressure and high temperature working characteristics, and its heating temperature can reach 340°C in the liquid phase or 400°C in the vapor phase. Any process that requires uniform and stable heating and does not allow direct flame heating can be used in various production occasions where the heating temperature is between 150 ℃ and 380 ℃, and organic heat carrier can be used for heating.
Technical parameters
Item Model | Rated Power | Design Pressure | Medium Outlet | Heating Area (M2) | Fuel Consumption | Furnace Oil Content (M3) | Boiler Dimensions (m) | Transport Weight | |
Light Oil (kg/h) | Natural Gas (Nm3/h) | ||||||||
YY(Q)W-120 | 120 | 1.1 | ≤350 | 9.8 | 12 | 15 | 0.1 | 1.6x1.0x1.5 | 1.5 |
YY(Q)W-240 | 240 | 14.5 | 25 | 30 | 0.15 | 1.9x1.2x1.8 | 2 | ||
YY(Q)W-350 | 350 | 21.3 | 37 | 44 | 0.25 | 2.1x1.3x2.0 | 2.58 | ||
YY(Q)W-500 | 500 | 24 | 52 | 63 | 0.3 | 2.2x1.3x2.0 | 3 | ||
YY(Q)W-700 | 700 | 40 | 69 | 83 | 0.5 | 3.2x1.4x2.2 | 3.7 | ||
YY(Q)W-1000 | 1000 | 50 | 100 | 120 | 0.8 | 3.3x1.6x2.4 | 5 | ||
YY(Q)W-1200 | 1200 | 64.6 | 120 | 145 | 0.85 | 3.8x1.7x2.5 | 5.8 | ||
YY(Q)W-1400 | 1400 | 78.5 | 140 | 170 | 1.1 | 4.1x1.9x2.7 | 6.7 | ||
YY(Q)W-1800 | 1800 | 87 | 180 | 220 | 1.2 | 4.6x2.0x3.0 | 7.8 | ||
YY(Q)W-2100 | 2100 | 94.5 | 210 | 260 | 1.7 | 5.0x2.0x3.0 | 8.8 | ||
YY(Q)W-2400 | 2400 | 106.2 | 244 | 296 | 1.9 | 5.0x2.2x3.1 | 9.8 | ||
YY(Q)W-3000 | 3000 | 163 | 300 | 365 | 3.5 | 5.9x2.4x3.4 | 15.5 | ||
YY(Q)W-3500 | 3500 | 205.2 | 350 | 425 | 3.8 | 6.5x2.4x3.6 | 17.8 | ||
YY(Q)W-4700 | 4700 | 254.3 | 470 | 570 | 4.2 | 7.2x2.5x3.7 | 21.5 | ||
YY(Q)W-6000 | 6000 | 325 | 580 | 700 | 6.2 | 7.8x3.0x3.8 | 25 | ||
YY(Q)W-7000 | 7000 | 410 | 680 | 810 | 7 | 8.2x3.0x3.8 | 27.5 | ||
YY(Q)W-10000 | 10000 | 520 | 970 | 1160 | 10.5 | 10x3.5x4.0 | 32 | ||
Notes: Parameter is for reference only, If any changes should follow actual drawings. |
Boiler Advantages
1. High thermal efficiency
The thermal oil boiler is circulation heating in liquid phase,
there is no heat loss leaded by condensing, thermal efficiency is
high, and the boiler is very safe when operating.
2) The boiler shell use aluminum silicate board for heat
preservation, low heat loss.
3) By equipped with economizer, make full use of flue gas heat,
decrease the exhaust smoke temperature.
2. Large combustion chamber
The boiler combustion chamber is composed with large diameter coil,
enough fuel combustion space, sufficient combustion, high thermal
efficiency. Moreover, the boiler adopts positive pressure
combustion, improve the combustion efficiency.
3. Excellent coil design
The spiral pipes are made of small diameter multi-head steel tubes,
good thermal expansibility, low stress, safe and reliable.
4. Sufficient output
The thermal oil heater adopts horizontal type three pass structure,
improve the heat utilization efficiency. Large heating area, good
heat transfer, achieve high thermal efficiency and sufficient
output.
5. Multi-function safety explosion-proof equipment
Equipped with explosion proof equipment at the back of boiler,
prevent deflagration in furnace, discharge high energy, to ensure
the boiler operate safely and efficiently.
6. Perfect automatic control
The hot oil boiler adopts PLC full automatic intelligent control
cabinet and interlock protect system, has the protect function on
oil temperature, medium temperature, pressure, etc, adjust
conveniently.
7. Convenient installation
The organic heat carrier furnace is package boiler, compact
structure, covers small area, convenient for installation and
maintenance.
Boiler Application
Owing to its characteristics of high heating temperature, low
working pressure, and energy saving, the thermal fluid heater could
be widely used in a variety of industrial heating process.
1) Textile industry - dyeing machine, drying rooms, high
temperature machine, resin setting machine.
2) Food industry - cooking, drying, vegetable oil refining.
3) Chemical industry - oil chemistry, polymer industry, reaction
tanks, distillation, concentration.
4) Plastics industry - plastics fired, extruded shape.
5) Rubber industry - hot press, hot extent, extrusion,
vulcanization molding, injection, etc.
6) Paper industry - drying, corrugated paper processing, calender,
glue roller.
7) Wood industry - hot processing, heat setting.
8) Machinery industry - drying, assembly processing
9)Building materials industry - plasterboard drying, asphalt
heating, emulsified asphalt, asphalt concrete, concrete component
maintenance, etc.
10) Synthetic fiber industry: polymerization, melting, spinning,
extension, dry