

Add to Cart
1,200,000 Kcal Solid Fuel Biomass Firewood Fired Thermal Oil Heater For Rubber Vulcanization Heating
thermal oil boiler (heater) is a kind of horizontal and vertical type forced circulation organic heat carrier boiler. It takes diesel, gas, town gas and oil as fuel and takes closely-arranged coils as heating surface including radiant heating surface and convection heating surface. For large-capacity boiler, the ceiling coils are equipped to ensure the compact structure.
The flue gas goes in three pass and heat recovery boiler or
air-preheater can be allocated to save energy and improve its
thermal efficiency well. New-type insulation method is taken to
reduces the thermal loss.
Rated capacity:120kw-14000kw
Max working temperature:280℃;320℃
Design fuel:coal,biomass, wood, firewood, solid fuel,etc
Application:plywood factory,asplat bitumen factory, latex nitrile glove factory,textile factroy,plastic factory,refinery industry, etc.
Techinical specification
Boiler Model | YGL- 120MA | YGL- 240MA | YGL- 350MA | YGL- 500MA | YGL- 700MA | YGL- 1000MA | YGL- 1200MA | YGL- 1400MA | YGL- 2000MA | |
Rated Thermal Power(Kw) | 120 | 240 | 350 | 500 | 700 | 1000 | 1200 | 1400 | 2000 | |
Thermal efficiency(%) | ≥78 | ≥80 | ||||||||
Max. Working temperature(℃) | 280/320 | |||||||||
Circulation Oil Volume(m3/h) | 12.5 | 20 | 30 | 40 | 60 | 80 | 100 | 100 | 100 | |
Applicable fuel | Coal, biomass,wood, firewood, wood logs | |||||||||
Dimensions (mm) | D | 1150 | 1300 | 1700 | 1700 | 1960 | 2050 | 2160 | 2290 | 2620 |
H | 2385 | 2650 | 3060 | 3475 | 3805 | 4415 | 4760 | 5445 | 6430 | |
Weight (Kg) | 1560 | 1960 | 3520 | 3800 | 4900 | 6100 | 7500 | 8820 | 13800 |
Technical Advantages
1. High thermal efficiency
1) The thermal oil heater is circulation heating in liquid phase,
there is no heat loss leaded by condensing, thermal efficiency is
high, and the boiler is very safe when operating.
2) Adopts horizontal type three pass structure, improve the heat
utilization efficiency.
3) The boiler shell use aluminum silicate board for heat
preservation, low heat loss.
4) Equipped with economizer, make full use of flue gas heat,
decrease the exhaust smoke temperature.
2. Large combustion chamber
1) The boiler combustion chamber is composed with chain grate and
large diameter coil, large combustion space, high combustion
efficiency.
2) Combustion equipment and boiler upper part are designed
separately, the boiler combustion chamber could be designed based
on the characteristics of different fuels, wide adaptability of
different fuels.
3. Excellent coil design
The radiation section adopts square coil, and the convection
section adopts serpentine coil, the heating coil has a good thermal
expansibility, low stress, safe and reliable.
4. Sufficient output
The hot oil boiler adopts horizontal type three pass structure,
improve the heat utilization efficiency. Large heating area, good
heat transfer, achieve high thermal efficiency and sufficient
output.
5. Perfect automatic control
The thermal oil boiler adopts PLC full automatic intelligent
control cabinet and interlock protect system, has the protect
function on oil temperature, medium temperature, pressure, etc,
adjust conveniently.
6. Compact Structure
The thermic fluid heater is vertical type, covers a small area, low
cost, and convenient for installation.
Boiler Picture
Boiler Application
Owing to its characteristics of high heating temperature, low
working pressure, and energy saving, the thermal oil heater could
be widely used in a variety of industrial production.
1) Textile industry - dyeing machine, drying rooms, high
temperature machine, resin setting machine.
2) Food industry - cooking, drying, vegetable oil refining.
3) Chemical industry - oil chemistry, polymer industry, reaction
tanks, distillation, concentration.
4) Plastics industry - plastics fired, extruded shape.
5) Rubber industry - hot press, hot extent, extrusion,
vulcanization molding, injection, etc.
6) Paper industry - drying, corrugated paper processing, calender,
glue roller.
7) Wood industry - hot processing, heat setting.
8) Machinery industry - drying, assembly processing
9)Building materials industry - plasterboard drying, asphalt
heating, emulsified asphalt, asphalt concrete, concrete component
maintenance, etc.
10) Synthetic fiber industry: polymerization, melting, spinning,
extension, dry