turnkey project Fully Automatic Continuous Waste Plastic Tyre Pyrolysis To Oil Machine

Brand Name:Jinzhen Machine
Certification:CE, ISO
Model Number:HNJZ-50Ton
Minimum Order Quantity:1 set Continuous Waste Rubber Tyre Pyrolysis Oil Plant
Delivery Time:25 work days
Payment Terms:L/C, T/T, Western Union
Contact Now

Add to Cart

Active Member
Location: Zhengzhou Henan China
Address: 3C Yuansheng International Building, Zhengzhou City, Henan Province, China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Turnkey Project Fully Automatic Continuous Waste Plastic Tyre Pyrolysis To Oil Machine


Our pyrolysis machine can convert oil sludge, waste plastic, tyre and rubber etc into fuel oil in normal pressure. The fuel oil can be refined throught the oil distillation machine to the diesel and gasoline. It has the characteristics of zero pollution, high efficiency, safety and environmental protection. Our pyrolysis plant not only can resolve the problem of the waste plastic / tyre and pollution, but also can bring substantial benefits for you.

NoWorking ItemFully Continuous pyrolysis plant
1ModelJZ-FC30JZ-FC40JZ-FC50JZ-FC60
2Raw MaterialWaste tires, waste rubber, waste plastic, waste acrylic, sludge, household garbage
324-hour CapacityT30405060
424-hour oil productionT14182227
5Heating MethodDirect heatingDirect heatingDirect heatingDirect heating
6Working Pressurenormal pressuresnormal pressuresnormal pressuresnormal pressures
7Cooling Methodwater-coolingwater-coolingwater-coolingwater-cooling
8Water consumptionT/h10121620
9NoiseDB(A)≤85≤85≤85≤85
10Total weightT60687580
11Floor spacem47*10*953*10*955*10*958*10*9

Working processing of PLC control continuous pyrolysis plant to get fuel oil from tires

To keep continuous feeding and discharge system, it requires the waste tires should be in small size. So before continuous pyrolysis process, the waste tires should be shredded into small pieces. And to avoid the steel wire mix with carbon black after pyrolysis process which is difficult to separate, it's better to remove the steel wire from waste tires at first.

As for PLC control continuous pyrolysis plant to get fuel oil from tires detailed process, please check as below:

1. Collect waste tires: All kinds of waste tires are available, from small car tires to big OTR tires.

2. Remove steel wire: Use a steel wire pulling machine to pull out the steel wire from waste tires. The steel wire pulling machine is operated automatically, which only need one work for operation.

3. Shred tires: Use a specialized tire shredder to process big whole tires into 3-5cm small pieces for easy feeding. The tire shredder is a single and fully automatic shredding system, which can be directly connected to the feeding system of the continuous pyrolysis plant, which no need any transfer process.

4. Continuous pyrolysis process: Shredded tires go into the Continuous scale tire pyrolysis unit, will firstly go through a mutiple pyrolysis reactor system to be pyrolyzed into oil gas. And oil gas will be cooling down to liquid oil through the cooling system. The residues (carbon black) will be pushed by continuous feeding tires to the carbon black dischrge system for discharge.


During the continuous pyrolysis process, reactor heating is by indirect heating, which will not damage reactor so much, thus to keep long usage life of the reactors. And since steel wire already removed from waste tires before pyrolysis processs, thus no need any magnetic separation system to process the carbon black and keep the factory clean. This carbon black product can be directly collected or transported for recycle use or further treatment.

Main feature of PLC control continuous pyrolysis plant to get fuel oil from tires

1. Feeding in every second and minute,automatic ejiecting wastes residue,Fuel product day and night

2. PLC control continuous pyrolysis plant to get fuel oil from tires , advanced technology, full automation.

3. Large capacity(10-30tons tire/plastic per day), high oil yield, good oil quality, high profit.

4. Low cost in operation. No need energy to heat the reactor, generated syn gas is enough, less manpower.

5. High quality and environment, to meet your strict emission standards.

6. Safety. Mature safety devices, such as alarm for over temperature and pressure, auto pressure releasing system, extra gas recycling system and fire fighting device, guarantee 100% safety in the continuous tyre to oil recycling process.

Advantages

1.Outstanding Features:

a. The reactor need preheat at the first when the machine starts producing.

b. 24h continuous working for 20-30 days without any stops.

c. No need fuels, sync gas is recycled during the operation.

d. Large daily capacity:20-25T/D;25-30T/D

e. New desing of vertical condensers. Good oil quality with high profit.

f. Low requirement on the raw materials.

2. Security:

a: Adopting automatic submerged-arc welding technology

b: All of the welding will be detected by the ultrasonic nondestructive testing method to ensure the welding quality and the welding shape.

c: Adopting manufacture process controlling system on the quality, every manufacture process, manufacture date, etc.

d: Equipped with anti-explosion device, safety valves, emergency valves, pressure and temperature meters, as well as the alarming

system.

3. Environmental-friendly:

a: Emission Standard: Adopting special gas scrubbers to remove acid gas and dust from smoke

b: Smell during operation: Fully enclosed during the operation

c: Water pollution: No pollution at all.

d: Solid pollution: the solid after pyrolysis is the crude carbon black and steel wires which can be deep-processed or sold directly with its value.


China turnkey project Fully Automatic Continuous Waste Plastic Tyre Pyrolysis To Oil Machine supplier

turnkey project Fully Automatic Continuous Waste Plastic Tyre Pyrolysis To Oil Machine

Inquiry Cart 0