Product Introduction
Before use,Please make sure that you have read this before
installing and using .
Device Power Connection:
Just only connect DVR with power supply, the power of cameras and
monitors are all supplied by DVR, aviation connectors is built-in
DC 12V output.
★ Use ignition switch to control video record delay time working
★Red cable connect positive of the car storage battery, black cable
connect negative, while yellow cable connect independent ignition
switch or independent positive;
★ switch connection(Indoor test usually use this way)
★Red cable and yellow cable together connect power positive of the
car storage battery, while black cable connect negative;
Camera connect AV IN, monitor connect BNC connector in AV out of
PANEL.
If it’s not standard aviation connector, please use the aviation
conversion line mentioned in the addenda, Black side is DC 12V
output, White side is Audio output, Yellow side is Video output;
Attention:
If the camera type and host Settings mode do not
match(4*720P,4*1080P), the input will be no image display.
In order to get better damping effect for HDD DVR, please
horizontally install DVR .
Tips:
In the video preview interface, you can undertake the following
actions :
Press F2 to enter Quick Setting, you can change the device
number,server IP and port information;
Press LOGIN to enter the menu, direct input password:
Administrator: 666666, User: 000000;
Press INFO to display the signal strength, dial-up connection
status, hardware and software versions, storage capacity, etc.;
Press 1.2.3.4 to enlarge the corresponding channel video, press 9
or ESC to return to four preview videos.
Press the playback key Directly start the video playback;
Device No. and Phone number must be the same , they are all
Platform device ID